Company
Innovationen
Products
The picture may show a similar product.
Part No.: 36050000A
CAPUS®CrossBoard
switch-disconnector-fuse, 3-pole
for fuses 10x38
double-breaking
operator independent switching (snap-action mechanism)
connection bottom
with CrossLink® interface
System
CrossBoard® 125A / 250A
Advantages of the product
3-poliger Lasttrennschalter zur sicheren galvanischen Trennung
Aufnahme von Sicherungseinsätzen 10 x 38 gemäß IEC 60269-2 von 0,5 A bis 16 A
Abschließbar mittels einer Verschlussvorichtung (Zubehör) im geöffenten oder geschlossenen Zustand
Product group | 01 |
Subgroup | 42 |
pack size | 1 |
EAN | 4021267360504 |
ECLASS 6.1 | 27371401 |
ECLASS 7.1 | 27371401 |
ETIM 4.0 | EC001040 |
ETIM 5.0 | EC001040 |
Standards
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
for fuse links size: | 10x38 |
fuse links acc. to standard: | IEC / HD 60269-2 |
requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
Details IEC | |
Standards | |
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
Electrical data IEC | |
Rated current (IEC): | 16 A |
rated voltage (IEC) AC: | 400 V |
rated frequency (IEC): | 50 / 60 Hz |
rated surge voltage Uimp : | 4 kV |
Utilisation category AC (IEC 60947-3) : | AC-22B (400V) |
cond. short-circuit current with fuses (AC): | 50 kA |
approved wth fuse links of operation class: | gG |
Electrical data UL | |
for wires UL: | Cu 60°C |
Mechanical data | |
W x H x D: | 22.5 x 180 x 88 |
weight: | 17,5 kg/100 |
poles: | 3-pole |
degree of protection: | IP30 |
Terminal points | |
cage clamp connection | |
screw drive: | 1x6,0 |
wire stripping: | 10 mm |
min. cross-section: | 1,5 mm² |
max. cross-section: | 6 mm² |
Md min.: | 1,0 Nm |
Md max.: | 1,2 Nm |
Not suitable for aluminium cables ! | |
min. cross-section UL: | AWG 16 |
max. cross-section UL: | AWG 10 |
torque (UL): | 8,8 - 10,6 lb-in |
for wires UL: | Cu 60°C |
Rahmenklemme für
|
Not suitable for aluminium cables ! | |
Reference |
4. Schaltkontakt kann als Meldeschalter verwendet werden: 24 V / 25 mA - 250 V / 16 A |
requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com