Company
Innovationen
Products
for UL feeder circuits >250V
The picture may show a similar product.
Part No.: 36262000A
MOTUS®C14 CrossBoard Connect Plus
electronic motor starter, 3-pole or 1-pole switchable
direct and reversing starter 0.1 - 6.6 A
with IO-Link interface, with display
with CrossLink® interface
NEW
System
CrossBoard® 125A / 250A
Product group | 21 |
Subgroup | 31 |
pack size | 1 |
EAN | 4021267362621 |
ECLASS 6.1 | 27370804 |
ECLASS 7.1 | 27370804 |
ETIM 4.0 | EC001037 |
ETIM 5.0 | EC001037 |
Standards
IEC 60947-1:2007 + A1:2010
IEC 60947-4-2:2011
UL 60947-1
Approvals
UL , CCC
for UL feeder circuits >250V
type number: MOTUS C14-6,6-C+
UL file: E510845, UL category (for USA): NMFT https://www.ul.com
UL file: E510845, UL category (for Canada): NMFT7 https://www.ul.com
Details IEC | |
Standards | |
IEC 60947-1:2007 + A1:2010 IEC 60947-4-2:2011 |
Electrical data IEC | |
Rated current (IEC): | 6.6 A |
rated voltage (IEC) AC: | 500 V |
min. operating voltage AC: | 130 V |
prosp. Kurzschlussstrom: | 100 kA |
trigger characteristic: |
Class 10A
Class 3E Class 2E Class 30 Class 20 Class 40E Class 10 Class 5 |
set nominal current: | Yes |
min. load current: | 0.1 A |
max. switching frequency: | 2 Hz |
switching cycles: | 30.000.000 |
reply contact: | 1 NO + 1 CO |
rated frequency (IEC): | 50 / 60 Hz |
interface: | IO-Link |
rated isolation voltage Ui AC: | 500 V |
rated surge voltage Uimp : | 4 kV |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 12.8 W.
(The power dissipation at full load would be 20.0 W.)
Details UL | |
Standards | |
UL 60947-1 |
for UL feeder circuits >250V |
Electrical data UL | |
rated current (UL): | 6.6 A |
rated voltage (UL) AC: | 480 V |
min. operating voltage AC: | 130 V |
rated frequency (UL): | 50 / 60 Hz |
SCCR: | 100 kA |
Mechanical data | |
W x H x D: | 22.5 x 160 x 132 |
weight: | 51.4 kg/100 |
poles: | 3-pole |
degree of protection: | IP20 |
vertical installation position: | Yes |
horizontal installation position: | No |
Terminal points | |
screw clamp connection | |
screw drive: | 0,8x4 |
wire stripping: | 8 mm |
min. cross-section: | 0.2 mm² |
max. cross-section: | 2.5 mm² |
Md min.: | 0.5 Nm |
Md max.: | 0.6 Nm |
min. cross-section UL: | AWG 24 |
max. cross-section UL: | AWG 12 |
torque (UL): | 5 - 7 lb-in |
permitted degree of polution: | 2 |
for UL feeder circuits >250V |
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com