Company
Innovationen
Products
На фотографии может быть изображена аналогичная статья.
Арт.: 33540000
QUADRON®60Classic Speed
выключатель-разъединитель нагрузки 3-полюсный
Рамная клемма, подсоединение снизу
160 A
double-breaking
operator independent switching (snap-action mechanism)
для шин 12, 15, 20, 25, 30 x 5, 10 и профильные шины
Система
60Classic
Преимущества продукта
With spring-controlled switch mechanism for frequent switching as per utilisation category "A"
Lockable in neutral position with up to 3 padlocks
FLAG indicator shows the switch setting of double interrupting main contacts
Can be used as a mains disconnector as per IEC / EN 60204-1 (main switch)
Main switch only in combination with AC-23A/B
AC-23B (690V/125A), AC-23A (500V/125A)
CrossLink® adapter technology
Simple and safe clicking into place and making contact
Busbar supports can be mounted above each other for flat busbars
Compact dimensions (106mm wide)
Группа продуктов | 14 |
Подгруппа | 20 |
Кол-во | 1 |
EAN | 4021267335403 |
ECLASS 6.1 | 27371403 |
ECLASS 7.1 | 27371403 |
ETIM 4.0 | EC000216 |
ETIM 5.0 | EC000216 |
Стандарты
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Сертификация
IEC (CB)
номер типа: QCS-160
Подробности IEC | |
Стандарты | |
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
Электрические данные IEC | |
Номинальный ток (IEC): | 160 A |
номинальное напряжение (IEC) AC: | 690 В |
номинальное напряжение изоляции U i AC: | 800 В |
номинальное импульсное напряжение U imp : | 8 kV |
Катагория применения AC: | AC-23B (690V/125A) AC-23A (500V/125A) AC-22A (690V/160A) |
Категория применения DC: | DC specifications: 2 current paths (L1,L3) in series |
номинальный кратковременный выдерживаемый ток I cw (1,0 с) макс.: | 4.5 кА |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 26,7 Вт.
(The power dissipation at full load would be 41,8 Вт.)
rated short-circuit making capacity 7kA (690V AC) | |
Special operating conditions corresponding to IEC / EN 61439-1 may yield to foulty activations of pilot switches and fuse monitors. The operating conditions have to be considered for the analysis of status signals. | |
When several devices are used side-by-side in continuous operation, the rated load factor specified in VDE 0660 Part 500 / EN 60 439-1, Table 1, must be observed. | |
System component: degree of protection IP20 at front as per DIN EN 60529, degree of protection near terminal depends on installation; shock protection as per DIN EN 50274 adapter module: front side degree of protection IP20 as per DIN EN 60529 (finger-safe) |
Механические данные | |
Ш x В x Г: | 106 x 200 x 128 |
Вес: | 216,0 kg/100 |
Полюсность: | 3-пол. |
для шин: | 12, 15, 20, 25, 30 x 5, 10 и профильные шины |
Busbar connector: externally tensioned contacting, convenient click mechanism, simple conversion of the combination bases from 5 to 10mm-thick busbars
Особенности клеммной техники | |
Not suitable for aluminium cables ! | |
Box terminal: |
Not suitable for aluminium cables ! | |
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com