Линейный выключатель-разъединитель с предохранителями 400 A

На фотографии может быть изображена аналогичная статья.

Описание

Арт.: 37537 000B

QUADRON 185Power

Линейный выключатель-разъединитель с предохранителями 400 A

Типоразмер 2, 1-полюсное отключение

V-clamp 50-300 mm²

terminal body alu, pressure piece brass

prewired with 3x measuring transformers 400 A / 333 mV, accuracy class 0.5, with 6-pole plug connection from behind

для шин 30, 40, 60, 80, 100, 120 x 10

НОВЫЙ

Система

185Power

Преимущества продукта

Self-closing inspection holes are available in the cover.

Cover can be locked when closed.

Группа продуктов 12
Подгруппа 64
Кол-во 1
EAN 4021267151706
ETIM 5.0 EC001046
ETIM 8.0 EC001046

Сертификация

Стандарты

IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only

номер типа: QU185-2 Pre-Assembled

Технические данные

для предохранителей размера: NH 2
предохранители в соответствии со стандартом: IEC / HD 60269-2
допустимая мощность рассеивания плавкой вставки: 34 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.
Подробности IEC
Стандарты
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Электрические данные IEC
Номинальный ток (IEC): 400 A
номинальное напряжение (IEC) AC: 800 В
accuracy class (current): 0.5
номинальное напряжение изоляции U i AC: 1000 В
номинальное импульсное напряжение U imp : 8 kV
Катагория применения AC:

AC-22B (800 V / 200 A)
 AC-22B (690 V / 400 A)
 AC-23B (400 V / 400 A)

cond. short-circuit current with fuses (AC): 100 kA / 690 V (400 A)
120 kA / 400 V (400 A)
80 kA / 800 V (200A)
одобрено с плавкими вставками рабочего класса: gG
устойчивость к короткому замыканию при защите предохранителями: 120 кА

power dissipation of the article:

The power dissipation at a typical load of 80 % results to 38,4 Вт.

(The power dissipation at full load would be 60,0 Вт.)

Дополнительные данные IEC

Следующие значения были проверены в ходе испытаний при определенных условиях. Для конкретного проектирования установки необходимо получить у компании Wöhner соответствующие условия.

further utilisation category DC (IEC 60947-3): DC-20B
max. voltage between the fuses: 1000V
visible information required: Do not switch under load.
A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such.
min. permitted operation temperature -40°C
max. permitted operation temperature 55°C
min. permitted temperature for transport and storage -40°C
Besondere Betriebsbedingungen gemäß IEC / EN 61439-1 können zu Fehlauslösungen von Meldeschaltern oder Sicherungsüberwachungen führen. Die vorliegenden Betriebsbedingungen sind dementsprechend bei der Auswertung der Meldesignale zu berücksichtigen.
Degree of protection IP20 at front, degree of protection near terminal depends on installation
Механические данные
Ш x В x Г: 100 x 687 x 189
Вес: 543,0 kg/100
Полюсность: 3-пол.
для шин: 30, 40, 60, 80, 100, 120 x 10
фронтальная степень защиты: IP20
degree of protection when open: IP10
Особенности клеммной техники
v-clamp
min. cross-section: 50 мм²
max. cross-section: 300 мм²
re: 70 - 150 mm²
rm: 50 - 120 mm²
se: 70 - 300 mm²
sm: 70 - 240 mm²
Suitable for aluminium conductors.
the temperature of aluminium conductors must not exceed 80°C (see operating instructions)
pre-treatment of aluminium conductors: see general technical information (under Downloads)
Свойства материала
halogen-free: Yes

Application notes

Suitable for aluminium conductors.
the temperature of aluminium conductors must not exceed 80°C (see operating instructions)
pre-treatment of aluminium conductors: see general technical information (under Downloads)
A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such.

The terminal compartment cover 33733 is always needed for the connection at top and when using cable lugs.

допустимая мощность рассеивания плавкой вставки: 34 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.

Links (Prices, CAD data)

Загрузки

Принадлежности

accessories for mounting

33740 000A
Клеммный зажим
for busbar systems without protection modules
Типоразмер 1 - 3
для: QU185-1..., QU185-2..., QU185-3..., CRL185-..., EQ185-A320-...
More

33738 000A
CrossLink® клеммный зажим
Для шинных систем с CrossLink® защитой от прикосновения
Типоразмер 1 - 3
для: QU185-1..., QU185-2..., QU185-3..., CRL185-..., EQ185-A320-...
More

connection accessories

33564 000B
connection kit
with 1 V-clamp, without cover
terminal body alu, pressure piece brass
for Cu / Al 120 - 300 mm²
e.g. for drilled PE or N bars
More

33559 000B
V-clamp
with cover cap
terminal body alu, pressure piece brass
Типоразмер 1 - 3
for Cu / Al 50 - 300 mm²
More

covers

33733 000A
Крышка клеммного отсека
Универсальная для HN устройств типоразмер 1 - 3 и соединений до 800 А
Типоразмер 1 - 3
More

33758 000A
Продольная соединительная полоса
Для передних крышек
Типоразмер 00 - 3
More

connection cable

37902 000A
Connection kit
spring connector strip with 6 x 0.5 mm² leads
for internal wiring of CTs / measuring transformers
НОВЫЙ
More

37903 000A
pin connector
for independent assembly of RJ12 cables
НОВЫЙ
More

37904 000A
pin connector with RJ12 lead
3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

37905 000A
pin connector with RJ12 lead
1.5 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

37906 000A
pin connector with RJ12 lead
0.6 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

37907 000A
pin connector with RJ12 lead
0.3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

further accessories

33156 000
Контрольный контакт
Перекидной контакт 250 В AC / 5 A, 30 В DC / 4 A
More

Find your contact

to the contact site

Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental

Order hotline (Germany)
+49 9563 751 161
order@woehner.de

Technical hotline (Germany)
+49 9563 751 260
support@woehner.com