L'Entreprise
Innovations
Service
Produits
The picture may show a similar product.
Référence 33505 000
QUADRON®Panel Speed
sectionneur avec fusibles à 3 pôles
borne à cage, pour poignée rotative de couplage de porte
taille 00
double-breaking
operator independent switching (snap-action mechanism)
for mounting plate
Système
Panel
Avantages produit
With spring-controlled switch mechanism for frequent switching as per utilisation category "A"
FLAG indicator shows the switch setting
Fuses can be changed safely and without tools thanks to double-breaking main contacts
Additional visible separating section by removing the cover incl. fuses
Can be used as mains disconnector as per IEC / EN 60204-1 (main switch)
Also as an Emergency Off switch in combination with the red-yellow door coupling twist handle
Main switch and Emergency Off only in combination with AC-23A/B
Switches can be installed 90° left/right horizontal, always with the same switch lug position
| Groupe de produits | 15 |
| Sous-groupe | 03 |
| Dimensions de l'emballage | 1 |
| EAN | 4021267335052 |
| ECLASS 6.1 | 27371401 |
| ECLASS 7.1 | 27371401 |
| ETIM 4.0 | EC001040 |
| ETIM 5.0 | EC001040 |
Normes
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Type: QCS-NH00
| for fuse links size: | NH 000, NH 00 |
| fuse links acc. to standard: | IEC / HD 60269-2 |
| permitted power dissipation of the fuse-link: | 10 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
| Details IEC | |
| Normes | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| Courant assigné (IEC): | 125 A |
| Tension assignée (IEC) CA: | 690 V |
| rated isolation voltage Ui AC: | 800 V |
| Tension assignée de tenue aux chocs Uimp: | 8 kV |
| Catégorie d'emploi CA: | AC-23B (690V/125A) AC-23A (500V/125A) AC-22A (690V/125A) |
| Catégorie d'emploi CC: | 2 current paths (L1,L3) in series DC-22B (220V/125A) 3 current paths in series DC-22B (440V/63A) |
| cond. short-circuit current with fuses (AC): | 50 kA / 690 V (125A) |
| approved wth fuse links of operation class: | gG |
| Special operating conditions corresponding to IEC / EN 61439-1 may yield to foulty activations of pilot switches and fuse monitors. The operating conditions have to be considered for the analysis of status signals. | |
| When several devices are used side-by-side in continuous operation, the rated load factor specified in VDE 0660 Part 500 / EN 60 439-1, Table 1, must be observed. |
| Charactéristiques mécaniques | |
| L x H x P: | 106 x 233 x 153 |
| Poids: | 201,6 kg/100 |
| Pôles: | 3 pôles |
| Mounting: | for mounting plate |
| Points de raccordement | |
| cage clamp connection | |
| screw drive: | S4 |
| wire stripping: | 20 mm |
| min. cross-section: | 1,5 mm² |
| max. cross-section: | 70 mm² |
| re: | 1.5 - 10 mm² |
| f: | 1.5 - 70 mm² |
| f + AE: | 1.5 - 70 mm² |
| (f + AE may not fit with max. cross-section) | |
| Md min.: | 5,0 Nm |
| Md max.: | 6,0 Nm |
| Not suitable for aluminium cables ! | |
| Alvéole de serrage: | 13x13 |
| lam. Cu width: | 9 - 13 mm |
| lam. Cu thickness: | 1 - 10 mm |
| Not suitable for aluminium cables ! | |
| permitted power dissipation of the fuse-link: | 10 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
33914
000
borne de raccordement 120 mm²
connexion frontale
pour: QCS-NH00, QCS-160
Plus
33915
000
connexion pour ligne auxiliaire, pour borne à cage
connecteur plat EN 61210 6,3 x 0,8
pour: QCB-NH00, QCS-NH00, QCS-160
Plus
33908
000
contact de signalisation pour surveiller l'état de l'interrupteur
commutateur 250 V AC / 5 A, 30 V DC / 4 A
pour: QCS-NH00, QCS-NH1, QCS-160, QCS-320
Plus
33910
000
mécanisme rotatif pour porte
noire, avec poignée
verrouillage de porte possible, cadenassable
pour: QCS-NH00, QCS-NH1, QCS-160, QCS-320
Plus
33911
000
mécanisme rotatif pour porte
jaune-rouge, avec poignée
verrouillage de porte possible, cadenassable
pour: QCS-NH00, QCS-NH1, QCS-160, QCS-320
Plus
33912
000
axe de prolongement, longueur 290 mm
pour: QCS-NH00, QCS-NH1, QCS-160, QCS-320
Plus
33913
000
axe de prolongement, longueur 490 mm
pour: QCS-NH00, QCS-NH1, QCS-160, QCS-320
Plus
Trouver votre contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Pays