chave seccionadora de fusível vertical 600 A (37588000A)

A imagem pode mostrar um produto similar.

Descrição

Código da peça: 37588 000A

QUADRON 185Power

chave seccionadora de fusível vertical 600 A

tamanho 3, comutável 1 polo

V-clamp 50-300 mm²

terminal body steel, pressure piece steel

prewired with 3x measuring transformers 600 A / 333 mV, accuracy class 1, with 6-pole plug connection from behind

para barramentos 30, 40, 60, 80, 100, 120 x 10

no longer available

Sistema

185Power

Vantagens do produto

Self-closing inspection holes are available in the cover.

Cover can be locked when closed.

Grupo de produto 12
Subgroup 64
Unidade por pacote 1
EAN 4021267375881
ETIM 5.0 EC001046

Aprovações

Standards

IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only

Número de tipo: QU185-3 V-Clamp

Dados técnicos

for fuse links size: NH 3
fuse links acc. to standard: IEC / HD 60269-2
permitted power dissipation of the fuse-link: 48 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.
Dados IEC
Standards
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Dados elétricos IEC
Corrente de medição (IEC): 600 A
Tensão de medição (IEC) AC: 800 V
accuracy class (current): 1
Tensão nominal de isolamento: 1000 V
Tensão suportável nominal de impulso Uimp: 8 kV
Utilisation category AC (IEC 60947-3) :

AC-22B (800 V / 315 A)
AC-21B (690 V / 500 A)
AC-22B (500 V / 500 A)
AC-23B (400 V / 500 A)

Utilisation category DC (IEC 60947-3) : DC-20B
max. voltage between the fuses: 1000V
visible information required: Do not switch under load.
cond. short-circuit current with fuses (AC): 80 kA / 800 V (315 A)
80 kA / 690 V (630 A)
100 kA / 500 V (630 A)
approved wth fuse links of operation class: gG

Dissipação de energia do artigo:

A dissipação de energia em uma carga de 80% resulta em 75,5 W.

(A dissipação de energia em sua carga máxima seria 118,0 W.)

Dados adicionais IEC

The following values have been verified with tests under certain conditions. Please ask Wöhner for this conditions before designing your panel.

A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such.
min. permitted operation temperature -40°C
max. permitted operation temperature 55°C
min. permitted temperature for transport and storage -40°C
Degree of protection IP20 at front, degree of protection near terminal depends on installation
Dados mecânicos
L x A x P: 100 x 670 x 189
Peso: 574,0 kg/100
Polaridade: 3 polos
para barramentos: 30, 40, 60, 80, 100, 120 x 10
front degree of protection: IP20
degree of protection when open: IP10
pontos terminais
v-clamp

Instruções de Aplicação

A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such.

The terminal compartment cover 33733 is always needed for the connection at top and when using cable lugs.

permitted power dissipation of the fuse-link: 48 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.

Links (Prices, CAD data)

Downloads

Acessórios

connection cable

37902 000A
Connection kit
spring connector strip with 6 x 0.5 mm² leads
for internal wiring of 333 mV measuring transformers
NEW
Mais

37903 000A
pin connector
for independent assembly of RJ12 cables
NEW
Mais

37904 000A
pin connector with RJ12 lead
3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
NEW
Mais

37905 000A
pin connector with RJ12 lead
1.5 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
NEW
Mais

37906 000A
pin connector with RJ12 lead
0.6 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
NEW
Mais

37907 000A
pin connector with RJ12 lead
0.3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
NEW
Mais

Encontre sua pessoa de contato

Para a página de contato

Wöhner Sistemas
Eletrotécnicos Ltda.
Rua Antônio Galvão Pacheco, 185
18550-612, Boituva/SPl
Brasil

Linha direta de pedidos (Alemanha)
+49 9563 751 125
order@woehner.de

Linha direta de tecnologia (Alemanha)
+49 9563 751 508
support@woehner.com