módulo de conexão (01595)

A imagem pode mostrar um produto similar.

Código da peça: 01595 000A

CRITO^®CrossBoard

módulo de conexão

grampo 150 mm²

3 polos

Conexão superior ou inferior

para CrossBoard 250 A 300 - 1100 mm

Sistema

CrossBoard® 125A / 250A

Grupo de produto	07
Subgroup	48

Unidade por pacote	1
EAN	4021267015954

Standards

IEC 61439-1:2020
IEC 60999-1:1999
IEC 60999-2:2003

UL 508

Approvals

for UL feeder circuits >250V

Número de tipo: CR-B-114-A1

UL file: E123577, UL category (for USA): NMTR https://www.ul.com

UL file: E123577, UL category (for Canada): NMTR7 https://www.ul.com

Aprovação CCC: no certification required

Tensão nominal de isolamento:	800 V
Tensão suportável nominal de impulso Uimp:	6 kV

rated peak withstand current I_pk max.:

30 kA

Dados adicionais IEC
The following values have been verified with tests under certain conditions. Please ask Wöhner for this conditions before designing your panel.

for UL feeder circuits >250V
suitable for field-installed conductors

SCCR:

100 kA with JDDZ fuse Class J 400 A / 600 V AC
65 kA with any DIVQ/7 circuit breaker 400 A / 480 V AC

front degree of protection:

IP20

pontos terminais
prism terminal
screw drive:	S4
wire stripping:	30 mm
min. cross-section:	35 mm²
max. cross-section:	150 mm²
Md min.:	4,0 Nm
Md max.:	6,0 Nm
Suitable for aluminium cables. When using aluminium cables, observe the maintenance instructions.

min. cross-section UL:	AWG 2
max. cross-section UL:	MCM 300
torque (UL):	35 - 53 lb-in
for wires UL:	Cu 75°C

Connecting circular conductors: 35... 50 mm² / 2... 1/0 AWG 4Nm / 35 lb in 70... 150 mm² / 2/0 AWG... 300 kcmil 6Nm / 53 lb in 35... 95 mm² flexible conductors, circular stranded conductors, flexible conductors with wire-end ferrules DIN 46228-1 max. 30 mm 120... 150 mm² flexible and circular stranded conductors Connecting flexible conductors: 4x - 10x 15,5mm x 0,8 mm 6Nm / 53 lb in

Suitable for aluminium cables. When using aluminium cables, observe the maintenance instructions.
The insulation performance of the article depends on the installation conditions.
Crossboards before production date November 2024 also suitable for 250 A (IEC + UL). Confirmation



for UL feeder circuits >250V