条形熔断器式隔离开关 160 A (37530)

The picture may show a similar product.

说明

订货号 37530 000B

QUADRON®185Power

条形熔断器式隔离开关 160 A

尺寸 00,3 极分断

high version with V-clamp 16-120 mm²

terminal body alu, pressure piece brass

prewired with 3x measuring transformers 150 A / 333 mV, accuracy class 1, with 6-pole plug connection

适用母线 30, 40, 60, 80, 100, 120 x 10

短期内将供货

系统

185Power

产品优势

盖罩带有自动闭合的检测孔。

盖罩在关闭状态下可锁定。

产品组 12

分组

62
包装件数 1
EAN 4021267375201
ECLASS 6.1 27142108
ECLASS 7.1 27142108
ETIM 4.0 EC001046
ETIM 5.0 EC001046

认证

标准

IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only

型号: QU185-00 Pre-Assembled

产品信息

for fuse links size: NH 000, NH 00
fuse links acc. to standard: IEC / HD 60269-2
所使用熔断器的允许损耗功率: 12 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.
Details IEC
标准
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Electrical data IEC
端部供电(IEC): 150 A
额定电压(IEC)AC: 800 V
accuracy class (current): 1
rated isolation voltage Ui AC: 1000 V
额定冲击耐受电压 Uimp: 8 kV
使用等级 AC (IEC 60947-3):

AC-23B 160A/400V
AC-22B 160A/500V

使用等级 DC (IEC 60947-3) : DC-20B
max. voltage between the fuses: 1000V
visible information required: Do not switch under load.
带熔断器时的条件额定短路电流: 30 kA / 800 V (63 A)
100 kA / 690 V
带熔断器测定的工作等级: gG

功率输出:

The power dissipation at a typical load of 80 % results to 17.9 W.

(The power dissipation at full load would be 28.0 W.)

Supplementary data IEC

下述参数已经在特定条件下通过测试得到验证。开始设计之前,请联系维纳尔咨询这些条件。

符合 IEC 60947-3 的熔断器组合电器,只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时,才允许超过额定工作电压运行。
防护等级 IP20 正面, 取决于安装时的连接区域
机械数值
宽 x 高 x 厚: 50 x 687 x 189
重量: 298.0 kg/100
极数: 3 极
适用母线: 30, 40, 60, 80, 100, 120 x 10
正面防护等级: IP20
degree of protection when open: IP10

固定方式:
在打孔母线上通过螺钉连接,  在不打孔母线上通过挂钩安装

连接端
v-clamp
min. cross-section: 16 mm²
最大横截面积: 120 mm²
re: 16 - 95 mm²
rm: 16 - 95 mm²
se: 25 - 120 mm²
sm: 25 - 120 mm²
Suitable for aluminium conductors.
the temperature of aluminium conductors must not exceed 80°C (see operating instructions)
pre-treatment of aluminium conductors: see general technical information (under Downloads)

Application notes

Suitable for aluminium conductors.
the temperature of aluminium conductors must not exceed 80°C (see operating instructions)
pre-treatment of aluminium conductors: see general technical information (under Downloads)
符合 IEC 60947-3 的熔断器组合电器,只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时,才允许超过额定工作电压运行。
所使用熔断器的允许损耗功率: 12 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.

链接

下载

附件

accessories for mounting

33739 000A
挂钩
适用于无系统盖罩的母线系统
尺寸 00
更多

33765 000A
CrossLink® 挂钩 IP20
适用于带防触摸保护功能的母线系统
尺寸 00
更多

connection accessories

33557 000A
V-clamp
terminal body alu, pressure piece steel
尺寸 00
for Cu / Al 16 - 120 mm²
新型
更多

covers

33732 000A
连接空间盖罩,高版,下端连接
适用于 33700, 33715, 33720, 33770, 33771, 33772 和 QUADRON®185Power Speed 尺寸 00
尺寸 00
更多

33113 000
侧面盖架
适用于正面盖罩
尺寸 00 - 3
更多

33758 000A
侧面条形支架
适用于正面盖罩
尺寸 00 - 3
更多

connection cable

37901 000A
Connection kit LTL NH1-3 for RJ12 cables
spring strip with 6 x 0.5 mm² cables
for internal wiring of the transformers and connection of the RJ12 cable
短期内将供货
更多

37903 000A
Wago connector components
for independent assembly of RJ12 cables
短期内将供货
更多

further accessories

33156 000
信号开关
同时适用于 250 V AC / 5 A, 30 V DC / 4 A
更多

获取联系人


跳转至联系页面

维纳尔(北京)电气系统有限公司
北京市北京经济技术开发区
融兴北一街11号院6号楼103号
邮编:100176

电话:+86 10 67870300
邮箱:info@woehner.com.cn
网站:woehner.com.cn