

The picture may show a similar product.
订货号 33197000
NH 熔断器式隔离开关 160 A,母线式
连接螺钉M8, 上/下端出线
不再供货
产品优势
For safe connection of the leads, the shock protection is split into 2.
Self-closing inspection holes are available in the cover.
产品组 | 09 |
分组 |
15 |
包装件数 | 1 |
EAN | 4021267331979 |
标准
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
for fuse links size: | NH 000, NH 00 |
fuse links acc. to standard: | IEC / HD 60269-2 |
所使用熔断器的允许损耗功率: | 12 W |
requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
Details IEC | |
标准 | |
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
Electrical data IEC | |
端部供电(IEC): | 160 A |
额定电压(IEC)AC: | 690 V |
额定电压 (IEC) DC: | 440 V |
rated isolation voltage Ui AC: | 800 V |
额定绝缘电压 Ui DC: | 500 V |
额定冲击耐受电压 Uimp: | 6 kV |
带熔断器时的条件额定短路电流: | 50 kA / 690 V |
带熔断器测定的工作等级: | gG |
功率输出:
The power dissipation at a typical load of 80 % results to 8.3 W.
(The power dissipation at full load would be 13.0 W.)
Supplementary data IEC | |
下述参数已经在特定条件下通过测试得到验证。开始设计之前,请联系维纳尔咨询这些条件。 |
最大电压 IEC DC: | 800 V |
符合 IEC 60947-3 的熔断器组合电器,只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时,才允许超过额定工作电压运行。 |
Switching capacity/utilisation categories AC-23B (400V), AC-23B (500V/125A), AC-22B (690V), AC-21B (690V) DC-22B (220V), DC-22B (440V/125A), DC-21B (440V), DC specifications: 2 current paths (L1,L3) in series for fuse links IEC 60269-2-1 (I) / DIN VDE 0636-201 size 00 up to 12W power dissipation | |
Entsprechend den angegeben AC- und DC- Schalteigenschaften und unter Berücksichtigung der Überlastbedingungen, sind gewisse Abstände zu geerdeten Metallteilen einzuhalten. Nähere Informationen auf Anfrage. Bei Verwendung als Trennschalter ist die Einhaltung der Abstände nicht erforderlich. |
|
Degree of protection IP30 at front, degree of protection near terminal depends on installation |
机械数值 | |
宽 x 高 x 厚: | 106 x 200 x 97 |
重量: | 124.0 kg/100 |
极数: | 3 极 |
Type of fastening: patented click mechanism
连接端 | |
screw connection | |
M8 | |
screw drive: | SW13 |
Md min.: | 8.0 Nm |
Md max.: | 10.0 Nm |
Not suitable for aluminium cables ! | |
Accessories: |
Not suitable for aluminium cables ! | |
符合 IEC 60947-3 的熔断器组合电器,只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时,才允许超过额定工作电压运行。 | |
所使用熔断器的允许损耗功率: | 12 W |
requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
获取联系人
跳转至联系页面
电话:+86 10 67870300
邮箱:info@woehner.com.cn
网站:woehner.com.cn