Sélection des produits

for UL feeder circuits >250V

sectionneur avec fusibles à 3 pôles (33512)

The picture may show a similar product.

Description

Référence 33512000

QUADRON®Panel Speed

sectionneur avec fusibles à 3 pôles

vis M10

taille 1

double-breaking

operator independent switsching

für Montageplatte

Système

Mounting plate

Avantages produit

With spring-controlled switch mechanism for frequent switching as per utilisation category "A"
Can be locked in neutral position with up to 3 padlocks
FLAG indicator shows the switch setting
Fuses can be changed safely and without tools thanks to double-breaking main contacts
Additional visible separating section by removing the cover incl. fuses
Can be used as a mains disconnector as per IEC/EN 60204-1 (main switch function)

Groupe de produits 15
Sous-groupe 06
Dimensions de l'emballage 1
EAN 4021267335120
catalog page 2020 : 6.17
ECLASS 6.1 27371401
ECLASS 7.1 27371401
ETIM 4.0 EC001040
ETIM 5.0 EC001040

Homologations

Normes

IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only

Approbations

VDE , DNV GL , EAC

Type: QCS-NH1

EAC Type: NH

Données techniques

for fuse links size: NH 1
fuse links acc. to standard: IEC / HD 60269-2
permitted power dissipation of the fuse-link: 23 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.
Details IEC
Normes
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Electrical data IEC
Courant assigné (IEC): 250 A
Tension assignée (IEC) CA: 690 V
rated isolation voltage Ui AC: 800 V
Tension assignée de tenue aux chocs Uimp: 8 kV
Catégorie d'emploi CA: AC-23B (690V/250A)
AC-23A (500V/250A)
AC-22A (690V/250A)
cond. short-circuit current with fuses (AC): 50 kA / 690V
approved wth fuse links of operation class: gG

power dissipation of the article:

The power dissipation at a typical load of 80 % results to 38,9 W.

(The power dissipation at full load would be 60,8 W.)

Fuses gL/gG, size 1, 690V/250A for fuse links IEC 60269-2 / DIN VDE 0636-2 size 1 up to 23W power dissipation
Special operating conditions corresponding to IEC / EN 61439-1 may yield to foulty activations of pilot switches and fuse monitors. The operating conditions have to be considered for the analysis of status signals.
When several devices are used side-by-side in continuous operation, the rated load factor specified in VDE 0660 Part 500 / EN 60 439-1, Table 1, must be observed.
System component: degree of protection IP20 at front as per DIN EN 60529, dependent upon installation in the connection area; shock protection to DIN EN 50274
Charactéristiques mécaniques
L x H x P: 184 x 314 x 193
Poids: 540,0 kg/100
Pôles: 3 pôles
Mounting: für Montageplatte
Points de raccordement
screw connection M10
screw drive: SW16
Md min.: 30,0 Nm
Md max.: 35,0 Nm

Links

Documentation

Accessoires

33142000
cache pour cosses, raccordement en haut et en bas
pour: QCB-NH1, QCS-NH1, QCS-320
Plus

33145000
borne prisme, double, pour câbles Cu
2x 35 - 70 mm²
pour: QCB-NH1, QCS-NH1, QCS-320
Plus

33163000
borne à étrier pour câbles Cu
70 - 150 mm²
pour: QCB-NH1, QCS-NH1, LTS-F 250, LTS 400
Plus

33166000
borne prisme, simple, pour câbles Cu
35 - 150 mm²
QCB-NH1, QCS-NH1, QCS-320
pour: QCB-NH1, QCS-NH1, QCS-320
Plus

33908000
contact de signalisation pour surveiller l'état de l'interrupteur
commutateur 250 V AC / 5 A, 30 V DC / 4 A
pour: QCS-NH00, QCS-NH1, QCS-160, QCS-320
Plus

33909000
borne à cage pour câbles Cu
35 - 150 mm²
QCB-NH1, QCS-NH1, QCS-320
pour: QCB-NH1, QCS-NH1, QCS-320
Plus

Trouver votre contact

to the contact site

Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental

Order hotline (Germany)
+49 9563 751 161
order@woehner.de

Technical hotline (Germany)
+49 9563 751 260
support@woehner.com

Produits Configurateur Calcul de la plus-value métal folder for files