L'Entreprise
Innovationen
Produits
Outils
for UL feeder circuits >250V
The picture may show a similar product.
Référence 01147000
CRITO®60Classic
kit de raccordement, 4 pôles, sans cache
95 - 300 mm², AWG 3/0 - 600 MCM
pour jeux de barres 20, 25, 30 x 5, 10 et barres profilées
Système
60Classic
| Groupe de produits | 07 |
| Sous-groupe | 51 |
| Dimensions de l'emballage | 1 |
| EAN | 4021267011475 |
| catalog page | 2020 : 3.5 |
| ECLASS 6.1 | 27141146 |
| ECLASS 7.1 | 27141146 |
| ETIM 4.0 | EC000001 |
| ETIM 5.0 | EC000001 |
Normes
IEC 61439-1:2011
IEC 60999-1:1999
IEC 60999-2:2003
UL 508
Approbations
UL , DNV GL , EAC
for UL feeder circuits >250V
Type: M300-L
EAC Type: TE-4P
UL file: E123577, UL category (for USA): NMTR https://www.ul.com
UL file: E123577, UL category (for Canada): NMTR7 https://www.ul.com
Homologation CCC: no certification required
| Details IEC | |
| Normes | |
|
IEC 61439-1:2011 IEC 60999-1:1999 IEC 60999-2:2003 |
| Electrical data IEC | |
| Courant assigné (IEC): | 500 A |
| Tension assignée (IEC) CA: | 800 V |
| Les performances d'isolation de l'article dépendent des conditions d'installation. | |
| rated peak withstand current Ipk max.: | 50.3 kA |
| Supplementary data IEC | |
|
Les valeurs suivantes ont été vérifiées par des tests sous certaines conditions. Veuillez demander ces conditions à Wöhner avant de concevoir votre armoire. |
| Tension maximale IEC CA: | 1000 V |
| Tension maximale IEC CC: | 1500 V |
| current capacity (IEC) max.: | 560 A |
| Details UL | |
| Normes | |
| UL 508 |
| for UL feeder circuits >250V | |
| suitable for field-installed conductors |
| Electrical data UL | |
| rated current (UL): | 420 A |
| rated voltage (UL) AC: | 600 V |
| rated frequency (UL): | 50 / 60 Hz |
| for wires UL: | Cu 75°C |
| SCCR unprotected max.: | 22 kA |
| 3 cycles (without OPD) @ 600 V AC | |
| SCCR protected max.: | 200 kA |
| SCCR: |
65 kA with any DIVQ/7 circuit breaker 400 A / 480 V AC
35 kA with any DIVQ/7 circuit breaker 400 A / 600 V AC 200 kA with fuse JDDZ Class J 600 A / 600 V AC 200 kA with JDDZ fuse Class L 800 A / 600 V AC 100 kA with JDDZ fuse Class L 1200 A / 600 V AC |
| Charactéristiques mécaniques | |
| L x H x P: | 204 x 244 x 115 |
| Poids: | 210,0 kg/100 |
| Pôles: | 4-polig |
| pour jeux de barres: | 20, 25, 30 x 5, 10 et barres profilées |
| Points de raccordement | |
| screw clamp connection | |
| screw drive: | S8 |
| wire stripping: | 38 mm |
| min. cross-section: | 95 mm² |
| max. cross-section: | 300 mm² |
| Md min.: | 24,0 Nm |
| Md max.: | 36,0 Nm |
|
Suitable for aluminium cables. When using aluminium cables, observe the maintenance instructions. |
|
| torque Alu: | Alu: Md 30 - 36 Nm |
| min. cross-section UL: | AWG 3/0 |
| max. cross-section UL: | MCM 600 |
| torque (UL): | 266 lb-in |
| for wires UL: | Cu 75°C |
Trouver votre contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Pays
