Company
Innovationen
Service
Products
The picture may show a similar product.
Part No.: 01145000
busbar connecting terminal 1600 A
95 mm
for busbars double-T section
System
60Classic
| Product group | 07 |
| Subgroup | 33 |
| pack size | 3 |
| EAN | 4021267011451 |
| ECLASS 6.1 | 27400606 |
| ECLASS 7.1 | 27400606 |
| ETIM 4.0 | EC000713 |
| ETIM 5.0 | EC000713 |
Standards
IEC 61439-1:2020
UL 508
Approvals
UL
for UL feeder circuits >250V
type number: LVH-L
UL file: E123577, UL category (for USA): NMTR https://www.ul.com
UL file: E123577, UL category (for Canada): NMTR7 https://www.ul.com
CCC approval: no certification required
| Details IEC | |
| Standards | |
| IEC 61439-1:2020 |
| Electrical data IEC | |
| rated voltage (IEC) AC: | 690 V |
| rated peak withstand current Ipk max.: | 72.7 kA |
| rated short-time withstand current Icw (1.0 s) max.: | 51.4 kA |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 4.3 W.
(The power dissipation at full load would be 6.7 W.)
| Supplementary data IEC | |
|
The following values have been verified with tests under certain conditions. Please ask Wöhner for this conditions before designing your panel. |
| max. permitted voltage (IEC) AC: | 1000 V |
| max. permitted voltage (IEC) DC: | 1500 V |
| current capacity (IEC) max.: | 1,600 A |
| Details UL | |
| Standards | |
| UL 508 |
| for UL feeder circuits >250V |
| Electrical data UL | |
| rated current (UL): | 1400 A |
| SCCR protected max.: | 65 kA |
| 65 kA in combination with H720-L and any DIVQ/7 1600 A / 480 V AC |
| SCCR: | 30 kA |
| Mechanical data | |
| W x H x D: | 95 x 44 x 43 |
| weight: | 94.3 kg/100 |
| for busbars: | double-T section |
4 clamp screws M8
tightening torque 20Nm
| permitted busbar displacement: | 5 |
| permitted spacing between systems: | 50 - 60 mm |
| The insulation performance of the article depends on the installation conditions. | |
|
Reference |
Max. permitted busbar offset 5mm, 3 units are needed for a 3-pole connection. |
| for UL feeder circuits >250V | |
| for a UL-compliant design of the longitudinal busbar connector, the UL separator set 01361 must be used | |
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Country
