条形熔断器式隔离开关 250 A

The picture may show a similar product.

说明

订货号 37577 000A

QUADRON 185Power

条形熔断器式隔离开关 250 A

尺寸 1，单极分断

V 型端子 50-300 mm²

terminal body steel, pressure piece steel

prewired with 3x measuring transformers 250 A / 333 mV, accuracy class 1, with 6-pole plug connection from behind

适用母线 30, 40, 60, 80, 100, 120 x 10

新型

系统

185Power

产品优势

盖罩带有自动闭合的检测孔。

盖罩在关闭状态下可锁定。

产品组 12

分组

 63
包装件数 1
EAN 4021267375775
ECLASS 14.0 27142108
ETIM 5.0 EC001046
ETIM 5.0 EC001046
ETIM 10.0 EC001046

认证

标准

IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only

型号: QU185-1 Pre-Assembled

产品信息

for fuse links size: NH 1
fuse links acc. to standard: IEC / HD 60269-2
所使用熔断器的允许损耗功率: 23 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.
Details IEC
标准
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Electrical data IEC
端部供电（IEC）: 250 A
额定电压（IEC）AC: 800 V
accuracy class (current): 1
rated isolation voltage Ui AC: 1000 V
额定冲击耐受电压 Uimp: 12 kV
使用等级 AC (IEC 60947-3): AC-22B (800 V / 160 A)
AC-22B (690 V / 250 A)
AC-23B (400 V / 250 A)
带熔断器时的条件额定短路电流: 80 kA / 800 V (160 A)
100 kA / 690 V (250 A)
120 kA / 500 V (250 A)
带熔断器测定的工作等级: gG
带熔断器时的分断能力: 120 kA

功率输出:

The power dissipation at a typical load of 80 % results to 15.4 W.

(The power dissipation at full load would be 24.0 W.)

Supplementary data IEC

下述参数已经在特定条件下通过测试得到验证。开始设计之前，请联系维纳尔咨询这些条件。
further utilisation category DC (IEC 60947-3): DC-20B
max. voltage between the fuses: 1000V
visible information required: Do not switch under load.
符合 IEC 60947-3 的熔断器组合电器，只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时，才允许超过额定工作电压运行。
最小允许工作温度 -40°C
最大允许工作温度 55°C
用于运输和存储时的最小允许温度 -40°C
防护等级 IP20 正面, 取决于安装时的连接区域
机械数值
宽 x 高 x 厚: 100 x 687 x 189
重量: 536.0 kg/100
极数: 3 极
适用母线: 30, 40, 60, 80, 100, 120 x 10
正面防护等级: IP20
degree of protection when open: IP10
连接端
v-clamp
min. cross-section: 50 mm²
最大横截面积: 300 mm²
re: 70 - 185 mm²
rm: 50 - 150 mm²
se: 95 - 300 mm²
sm: 70 - 240 mm²
Suitable for aluminium conductors.
the temperature of aluminium conductors must not exceed 80°C (see operating instructions)
pre-treatment of aluminium conductors: see general technical information (under Downloads)
原材料性能
halogen-free: Yes

Application notes

Suitable for aluminium conductors.
the temperature of aluminium conductors must not exceed 80°C (see operating instructions)
pre-treatment of aluminium conductors: see general technical information (under Downloads)
符合 IEC 60947-3 的熔断器组合电器，只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时，才允许超过额定工作电压运行。

The terminal compartment cover 33733 is always needed for the connection at top and when using cable lugs.
所使用熔断器的允许损耗功率: 23 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.

Links (Prices, CAD data)

Article master data, overviews and prices

最新的金属附加值

3D and 2D data in a wide range of formats

CAD data WSCAD

下载

| 通用技术说明

| 安装说明

| 比例图

| 比例图 2

| EU 符合性声明

| 产品描述（PDF)

| 设计验证用产品数据，根据 IEC / EN 61439-1

| 招标文件 - 扩展版本(*.rtf)

| 招标文件 - 标准版本(*.rtf)

附件

accessories for mounting

33740 000A
挂钩
for busbar systems without protection modules
尺寸 1 - 3
适用于: QU185-1..., QU185-2..., QU185-3..., CRL185-..., EQ185-A320-...
更多

33738 000A
CrossLink® 挂钩
适用于带 CrossLink® 防触摸保护功能的母线系统
尺寸 1 - 3
适用于: QU185-1..., QU185-2..., QU185-3..., CRL185-..., EQ185-A320-...
更多

connection accessories

33561 000A
V 型端子
terminal body steel, pressure piece steel
尺寸 1 - 3
for Cu / Al 50 - 300 mm²
更多

33564 000B
连接组件
with 1 V-clamp, without cover
terminal body alu, pressure piece brass
for Cu / Al 120 - 300 mm²
e.g. for drilled PE or N bars
更多

covers

33733 000A
连接空间盖罩
通用于尺码 1 - 3 的 NH 导轨和条形连接器 800 A
尺寸 1- 3
更多

33758 000A
侧面条形支架
适用于正面盖罩
尺寸 00 - 3
更多

connection cable

37903 000A
pin connector
for independent assembly of RJ12 cables
新型
更多

37904 000A
pin connector with RJ12 lead
3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
新型
更多

37905 000A
pin connector with RJ12 lead
1.5 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
新型
更多

37906 000A
pin connector with RJ12 lead
0.6 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
新型
更多

37907 000A
pin connector with RJ12 lead
0.3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
新型
更多

further accessories

33156 000
信号开关
同时适用于 250 V AC / 5 A, 30 V DC / 4 A
更多

https://pim.woehner.de/ZH/INT/1000314322

获取联系人


跳转至联系页面

维纳尔（北京）电气系统有限公司
北京市北京经济技术开发区
融兴北一街11号院6号楼103号
邮编：100176

电话：+86 10 67870300
邮箱：info@woehner.com.cn
网站：woehner.com.cn