公司介绍
创新 (英语)
服务支持
产品
The picture may show a similar product.
订货号 33520 000A
QUADRON 185Power
条形熔断器式隔离开关 160 A
尺寸 00，3 极分断
V 型端子，95 mm²，高版
terminal body Al, pressure piece brass
适用母线 30, 40, 60, 80, 100, 120 x 10
停产产品
date of phase-out: 31.03.2026
系统
185Power
产品优势
盖罩带有自动闭合的检测孔。
盖罩在关闭状态下可锁定。
| 产品组 | 12 |
分组 |
52 |
| 包装件数 | 1 |
| EAN | 4021267335205 |
| ECLASS 14.0 | 27142108 |
| ETIM 5.0 | EC001046 |
| ETIM 5.0 | EC001046 |
| ETIM 10.0 | EC001046 |
标准
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
认证许可
IEC (CB) , CCC
型号: QU185-00 V-Clamp
EAC Type: NH
| for fuse links size: | NH 000, NH 00 |
| fuse links acc. to standard: | IEC / HD 60269-2 |
| 所使用熔断器的允许损耗功率: | 12 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
| Details IEC | |
| 标准 | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| 端部供电（IEC）: | 160 A |
| 额定电压（IEC）AC: | 800 V |
| rated isolation voltage Ui AC: | 1000 V |
| 额定冲击耐受电压 Uimp: | 8 kV |
| 使用等级 AC (IEC 60947-3): | AC-22B (800 V / 63 A) |
| 带熔断器时的条件额定短路电流: | 30 kA / 800 V (63 A) |
| 100 kA / 690 V | |
| 带熔断器测定的工作等级: | gG |
| 带熔断器时的分断能力: | 100 kA |
功率输出:
The power dissipation at a typical load of 80 % results to 17.9 W.
(The power dissipation at full load would be 28.0 W.)
| Supplementary data IEC | |
|
下述参数已经在特定条件下通过测试得到验证。开始设计之前，请联系维纳尔咨询这些条件。 |
| further utilisation category DC (IEC 60947-3): | DC-20B max. voltage between the fuses: 1000V visible information required: Do not switch under load. |
| 符合 IEC 60947-3 的熔断器组合电器，只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时，才允许超过额定工作电压运行。 |
| 最小允许工作温度 | -40°C |
| 最大允许工作温度 | 55°C |
| 用于运输和存储时的最小允许温度 | -40°C |
| 防护等级 IP20 正面, 取决于安装时的连接区域 |
| 机械数值 | |
| 宽 x 高 x 厚: | 50 x 670 x 189 |
| 重量: | 261.5 kg/100 |
| 极数: | 3 极 |
| 适用母线: | 30, 40, 60, 80, 100, 120 x 10 |
| CT can be integrated in the device: | ja |
| 正面防护等级: | IP20 |
| 连接端 | |
| v-clamp | |
| min. cross-section: | 16 mm² |
| 最大横截面积: | 120 mm² |
| re: | 16 - 95 mm² |
| rm: | 16 - 95 mm² |
| se: | 25 - 120 mm² |
| sm: | 25 - 120 mm² |
|
Suitable for aluminium conductors. the temperature of aluminium conductors must not exceed 80°C (see operating instructions) pre-treatment of aluminium conductors: see general technical information (under Downloads) |
|
| 原材料性能 | |
| halogen-free: | Yes |
| Suitable for aluminium conductors. the temperature of aluminium conductors must not exceed 80°C (see operating instructions) pre-treatment of aluminium conductors: see general technical information (under Downloads) |
|
| 符合 IEC 60947-3 的熔断器组合电器，只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时，才允许超过额定工作电压运行。 | |
| 所使用熔断器的允许损耗功率: | 12 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
获取联系人
跳转至联系页面
电话：+86 10 67870300
邮箱：info@woehner.com.cn
网站：woehner.com.cn
Country