Линейный выключатель-разъединитель с предохранителями 600 A (37588000A)

На фотографии может быть изображена аналогичная статья.

Описание

Арт.: 37588 000A

QUADRON 185Power

Линейный выключатель-разъединитель с предохранителями 600 A

Типоразмер 3, 1-полюсное отключение

V-clamp 50-300 mm²

terminal body steel, pressure piece steel

prewired with 3x measuring transformers 600 A / 333 mV, accuracy class 1, with 6-pole plug connection from behind

для шин 30, 40, 60, 80, 100, 120 x 10

больше не доступный

Система

185Power

Преимущества продукта

Self-closing inspection holes are available in the cover.

Cover can be locked when closed.

Группа продуктов 12
Подгруппа 64
Кол-во 1
EAN 4021267375881
ETIM 5.0 EC001046

Сертификация

Стандарты

IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only

номер типа: QU185-3 V-Clamp

Технические данные

для предохранителей размера: NH 3
предохранители в соответствии со стандартом: IEC / HD 60269-2
допустимая мощность рассеивания плавкой вставки: 48 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.
Подробности IEC
Стандарты
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Электрические данные IEC
Номинальный ток (IEC): 600 A
номинальное напряжение (IEC) AC: 800 В
accuracy class (current): 1
номинальное напряжение изоляции U i AC: 1000 В
номинальное импульсное напряжение U imp : 8 kV
Катагория применения AC:

AC-22B (800 V / 315 A)
AC-21B (690 V / 500 A)
AC-22B (500 V / 500 A)
AC-23B (400 V / 500 A)

Категория применения DC: DC-20B
max. voltage between the fuses: 1000V
visible information required: Do not switch under load.
cond. short-circuit current with fuses (AC): 80 kA / 800 V (315 A)
80 kA / 690 V (630 A)
100 kA / 500 V (630 A)
одобрено с плавкими вставками рабочего класса: gG

power dissipation of the article:

The power dissipation at a typical load of 80 % results to 75,5 Вт.

(The power dissipation at full load would be 118,0 Вт.)

Дополнительные данные IEC

Следующие значения были проверены в ходе испытаний при определенных условиях. Для конкретного проектирования установки необходимо получить у компании Wöhner соответствующие условия.

A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such.
min. permitted operation temperature -40°C
max. permitted operation temperature 55°C
min. permitted temperature for transport and storage -40°C
Degree of protection IP20 at front, degree of protection near terminal depends on installation
Механические данные
Ш x В x Г: 100 x 670 x 189
Вес: 574,0 kg/100
Полюсность: 3-пол.
для шин: 30, 40, 60, 80, 100, 120 x 10
фронтальная степень защиты: IP20
degree of protection when open: IP10
Особенности клеммной техники
v-clamp

Application notes

A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such.

The terminal compartment cover 33733 is always needed for the connection at top and when using cable lugs.

допустимая мощность рассеивания плавкой вставки: 48 W
requirements for contact parts: Fuse links with silver-plated contact pieces recommended.
For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed.

Links (Prices, CAD data)

Загрузки

Принадлежности

connection cable

37902 000A
Connection kit
spring connector strip with 6 x 0.5 mm² leads
for internal wiring of 333 mV measuring transformers
НОВЫЙ
More

37903 000A
pin connector
for independent assembly of RJ12 cables
НОВЫЙ
More

37904 000A
pin connector with RJ12 lead
3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

37905 000A
pin connector with RJ12 lead
1.5 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

37906 000A
pin connector with RJ12 lead
0.6 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

37907 000A
pin connector with RJ12 lead
0.3 m
to connect prewired in-line fuse switch-disconnectors with the current extension module 37100
НОВЫЙ
More

Find your contact

to the contact site

Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental

Order hotline (Germany)
+49 9563 751 161
order@woehner.de

Technical hotline (Germany)
+49 9563 751 260
support@woehner.com