Innovationen
Prodotti
for UL feeder circuits >250V
The picture may show a similar product.
Cod.art.: 33359000
CAPUS®Panel
Sezionatore sottocarico per fusibili NH, 3p
viti M8, manovra rossa
Gr. NH 00
for mounting plate
Montaggio
Panel
Vantaggi prodotto
double-breaking main contacts,
visible separation sections,
user-independent switching,
voltage-free exchange of fuses
assembly and connection material contained in scope of delivery.
gruppo di prodotto | 15 |
sottogruppo prodotto | 03 |
Pz / conf. | 1 |
EAN | 4021267333591 |
pagina catalogo | 2020 : 6.21 |
ECLASS 6.1 | 27371401 |
ECLASS 7.1 | 27371401 |
ETIM 4.0 | EC001040 |
ETIM 5.0 | EC001040 |
Norme
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Omologazioni
IEC (CB)
type no.: LTS-F160
per fusibili di grandezza: | NH 000, NH 00 |
fusibile secondo norma: | IEC / HD 60269-2 |
potenza diss. max. ammissibile del fusibile inserito: | 12 W |
Details IEC | |
Norme | |
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
Electrical data IEC | |
Corrente nominale (IEC): | 160 A |
tensione nominale (IEC) AC: | 690 V |
tensione nominale di isolamento Ui AC: | 1000 V |
tensione di picco Uimp: | 8 kV |
Categoria d'impiego AC: | AC-23A (690V/125A) AC-23A (500V) AC-22A (690V) AC-21A (690V) |
corrente nom. di cto cto condizionata da fusibili (AC): | 80 kA / 690 V |
secondo prove fatte con fusibili di caratteristica: | gG |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 17,9 W.
(The power dissipation at full load would be 28,0 W.)
Mechanical lifespan (switching operations) 7000 | |
conv. therm. current in housing 160 A, horizontal installation (adjacent poles) encapsulated 252 x 378 x 302mm 145 A, vertical installation (poles beneath each other) encapsulated 500 x 500 x 300mm |
|
Shock protection at front with terminal space cover IP20 for fuse links DIN 43620 size 00 up to 12W power dissipation |
Valori meccanici | |
L x A x P: | 171 x 148 x 195 |
peso: | 230,0 kg/100 |
Poli: | 3 poli |
Mounting: | for mounting plate |
Connection screw (clamp connection can be retrofitted),
screw connection M8, 14 Nm ± 10% torque,
clamp connection cross-section 2.5 - 70 mm², s(r), f,
terminal space 12x1-10mm, lam. Cu 3Nm torque
* Aluminium conductors must be prepared before connection in accordance with the pertinent technical recommendations. The connections are to be checked at regular intervals and serviced not later than every 6 months.
** reduction in the max. conductor cross-sections may be required.
Connessioni | |
Not suitable for aluminium cables ! | |
viti M8 : |
Avvisi e consigli
When installing a cover, the switch-disconnector on the housing must not be closed, the safety instructions for the Emergency Stop switch must be observed.
Trova il tuo contatto
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com