Innovationen
Prodotti
The picture may show a similar product.
Cod.art.: 31588000A
SECUR®60Classic EasyLiner
base D0 sezionabile 3p, per sistemi barre 5p
per fusibili D01 e D02, per sistemi barre marchio "Hensel" di 250 A, 400 A und 630 A
E18 / 63 A / 3P
operator independent switching (snap-action mechanism)
connessione cavi in basso
per barre 12, 20, 30 x 5, 10
Montaggio
60Classic
Vantaggi prodotto
spring terminal enables connection without tools (at first installation)
gruppo di prodotto | 01 |
sottogruppo prodotto | 42 |
pz/ conf. | 1 |
EAN | 4021267315887 |
pagina catalogo | 2020 : 3.19 |
ECLASS 6.1 | 27142110 |
ECLASS 7.1 | 27142110 |
ETIM 4.0 | EC000277 |
ETIM 5.0 | EC000277 |
Norme
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Omologazioni
IEC (CB) , VDE , CCC
type no.: SEL
CCC certificate: 2014010302710123
per fusibili di grandezza: | D0 |
fusibile secondo norma: | IEC / HD 60269-3 |
potenza diss. max. ammissibile del fusibile inserito: | 5,5 W |
requirements for contact parts: | use fuse links with silver-plated contacts |
Details IEC | |
Norme | |
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
Electrical data IEC | |
corrente nominale (IEC): | 63 A |
tensione nominale (IEC) AC: | 400 V |
frequenza nominale (IEC): | 50 / 60 Hz |
tensione nominale di isolamento Ui AC: | 500 V |
tensione di picco Uimp: | 6 kV |
Categoria d'impiego AC: | AC-22B (400 V) |
corrente nom. di cto cto condizionata da fusibili (AC): | 50 kA / 400 V |
secondo prove fatte con fusibili di caratteristica: | gG |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 4,5 W.
(The power dissipation at full load would be 7,0 W.)
Supplementary data IEC | |
I seguenti valori sono stati rilevati tramite prove con determinate condizioni. Prima di progettare vostro impianto chiedere a Wöhner suddette condizioni. |
Sezionatori e basi sezionabili sec. IEC 60947-3 possono essere impiegati anche oltre alla loro tensione nominale, fino al valore della tensione d'isolamento, se l'impiego prevede l'utilizzo come semplice base portafusibile (senza funzione di sezionamento), e se viene indicato ben visibile sul prodotto stesso. |
reduction factor at ambient temperature: 35°C 1,0 45°C 0,9 55°C 0,8 |
|
for fuse links and gauge elements acc. to IEC / HD 60269-3 use of D02 fuse links with silver plated caps is recommended |
|
The function of isolation between incoming and outgoing contacts is provided by the opening of the switching mechanism as required in the standard. |
Valori meccanici | |
L x A x P: | 27 x 200 x 80 |
peso: | 33,0 kg/100 |
Poli: | 3 poli |
per barre: | 12, 20, 30 x 5, 10 |
grado di protezione dal fronte: | IP20 |
Connessioni | |
spring pulley connection | |
screw drive: | PZ2 |
wire stripping: | 12 mm |
min. cross-section: | 1,5 mm² |
max. cross-section: | 16 mm² |
Md min.: | 2,5 Nm |
Md max.: | 3,0 Nm |
Not suitable for aluminium cables ! | |
1,5 - 16 mm² round stranded and flexible without wire-end ferrule |
Avvisi e consigli
The devices have to be equipped with D0 gauge rings. Together with reducer part no. 31902 also suitable for fuse links D01.
The use of the side module part no. 31914 is recommended for continuous loads of 35 A or greater..
use of D02 fuse links with silver plated caps is required
can be locked (padlock) in OFF position (O) and sealed in ON position (1)
can be used in 5-pole busbar systems 250 A, 400 A and 630 A of company Hensel.
Trova il tuo contatto
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com