L'Entreprise
Innovationen
Service
Produits
for UL feeder circuits >250V
The picture may show a similar product.
Référence 01593000A
CRITO®CrossBoard
bornier de raccordement
avec bornes à cage 6 - 50 mm² / AWG 10 - AWG 1
3 pôles
Système
CrossBoard® 125A / 250A
Avantages produit
direct connection to the CrossBoard, cover included
capable of feeding (up to 125 A) 1 or 2 CrossBoards simultaneously with balanced or unbalanced load on the boards.
can be used without cables as a bridge connection between 2 CrossBoards up to 125 A. Feeding a third CrossBoard with cables is acceptable, but the total current cannot exceed 125 A.
touch-safe
CRITO® unlockable from top or bottom
| Groupe de produits | 07 |
| Sous-groupe | 42 |
| Dimensions de l'emballage | 1 |
| EAN | 4021267015930 |
| ECLASS 6.1 | 27141146 |
| ECLASS 7.1 | 27141146 |
| ETIM 4.0 | EC000001 |
| ETIM 5.0 | EC000001 |
Normes
IEC 61439-1:2020
IEC 60999-1:1999
IEC 60999-2:2003
UL 508
Approbations
UL
for UL feeder circuits >250V
Type: CR45-A
UL file: E123577, UL category (for USA): NMTR https://www.ul.com
UL file: E123577, UL category (for Canada): NMTR7 https://www.ul.com
Homologation CCC: no certification required
| Details IEC | |
| Normes | |
|
IEC 61439-1:2020 IEC 60999-1:1999 IEC 60999-2:2003 |
| Electrical data IEC | |
| Courant assigné (IEC): | 125 A |
| Tension assignée (IEC) CA: | 690 V |
| rated isolation voltage Ui AC: | 800 V |
| rated peak withstand current Ipk max.: | 15 kA |
| Supplementary data IEC | |
|
Les valeurs suivantes ont été vérifiées par des tests sous certaines conditions. Veuillez demander ces conditions à Wöhner avant de concevoir votre armoire. |
| Tension maximale IEC CA: | 800 V |
| Tension maximale IEC CC: | 800 V |
| current capacity (IEC) max.: | 125 A |
| Details UL | |
| Normes | |
| UL 508 |
| for UL feeder circuits >250V | |
| suitable for field-installed conductors |
| Electrical data UL | |
| rated current (UL): | 100 A |
| rated voltage (UL) AC: | 600 V |
| rated frequency (UL): | 50 / 60 Hz |
| SCCR unprotected max.: | 10 kA |
| 3 cycles (without OPD) @ 600 V AC | |
| SCCR protected max.: | 100 kA |
| SCCR: |
65 kA with any DIVQ/7 circuit breaker 100 A / 600 V AC
100 kA with any DIVQ/7 circuit breaker 100 A / 480 V AC 100 kA with JDDZ fuse Class J 175 A / 600 V AC |
| Charactéristiques mécaniques | |
| L x H x P: | 45 x 160 x 92 |
| Poids: | 25,0 kg/100 |
| Pôles: | 3 pôles |
| front degree of protection: | IP20 |
| Points de raccordement | |
| cage clamp connection | |
| screw drive: | S4 |
| wire stripping: | 17 mm |
| min. cross-section: | 6 mm² |
| max. cross-section: | 50 mm² |
| Md min.: | 5,0 Nm |
| Md max.: | 6,0 Nm |
| min. cross-section UL: | AWG 10 |
| max. cross-section UL: | AWG 1/0 |
| torque (UL): | 44 - 53 lb-in |
|
6 - 50 mm² / AWG 10 - AWG 1 (feindrähtig mit Aderendhülse eventuell nicht mit maximalen Querschnitt möglich) |
|
| Les performances d'isolation de l'article dépendent des conditions d'installation. | |
| for UL feeder circuits >250V |
Trouver votre contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Pays
