bornier de raccordement (01065)

The picture may show a similar product.

Description

Référence 01065 000A

CRITO®CrossBoard

bornier de raccordement

300 mm², for rear feeding of the CrossBoard

3 pôles

raccordement par le haut ou par le bas

pour CrossBoard 800 A 500 - 1100 mm

Nouveau

Système

CrossBoard® 800 A

Groupe de produits 07
Sous-groupe 51
Dimensions de l'emballage 1
EAN 4021267010652
ECLASS 6.1 27141146
ECLASS 7.1 27141146
ETIM 4.0 EC000001
ETIM 5.0 EC000001

Homologations

Normes

IEC 61439-1:2020
IEC 60999-1:1999
IEC 60999-2:2003

UL 508

Approbations

UL

for UL feeder circuits >250V

Type: CR-B-200

UL file: E123577, UL category (for USA): NMTR https://www.ul.com

UL file: E123577, UL category (for Canada): NMTR7 https://www.ul.com

Homologation CCC: no certification required

Données techniques

Details IEC
Normes
IEC 61439-1:2020
IEC 60999-1:1999
IEC 60999-2:2003
Electrical data IEC
Courant assigné (IEC): 800 A
Tension assignée (IEC) CA: 690 V
rated isolation voltage Ui AC: 800 V
Tension assignée de tenue aux chocs Uimp: 6 kV
rated peak withstand current  Ipk max.: 80 kA
rated short-time withstand current Icw (1.0 s) max.: 30 kA
Supplementary data IEC

Les valeurs suivantes ont été vérifiées par des tests sous certaines conditions. Veuillez demander ces conditions à Wöhner avant de concevoir votre armoire.

Tension maximale IEC CA: 800 V
Tension maximale IEC CC: 800 V
current capacity (IEC) max.: 800 A
Details UL
Normes
UL 508
for UL feeder circuits >250V
suitable for field-installed conductors
Electrical data UL
rated current (UL): 800 A
rated voltage (UL) AC: 600 V
rated frequency (UL): 50 / 60 Hz
for wires UL: Cu 75°C
SCCR unprotected max.: 30 kA
3 cycles (without OPD) @ 725 V AC
SCCR protected max.: 65 kA
SCCR: 65 kA with any DIVQ/7 circuit breaker 800 A / 480 V AC
Charactéristiques mécaniques
L x H x P: 200 x 200 x 65
Poids: 67,0 kg/100
Pôles: 3 pôles
front degree of protection: IP20
Points de raccordement
Prismenklemme
screw drive: SW13
wire stripping: 45 mm
min. cross-section: 150 mm²
max. cross-section: 300 mm²
rm: 150 - 300 mm²
Md min.: 6,4 Nm
Md max.: 9,6 Nm
Not suitable for aluminium cables !
  
min. cross-section UL: MCM 300
max. cross-section UL: MCM 600
torque (UL): 71 lb-in
for wires UL: Cu 75°C

Application notes

Not suitable for aluminium cables !
Les performances d'isolation de l'article dépendent des conditions d'installation.
for UL feeder circuits >250V

Connectable cross-sections:

Prism clamp with laminated copper:
1x 10x 15.5… 24 mm x 0.8… 1.0 mm
2x 10x 15.5… 24 mm x 0.8… 1.0 mm
Torque: 8 Nm, 71 lb-in
Stripping lenght: 50 +/- 5 mm
Rated current: 500 A

Prism clamp with round wires:
150… 300 mm
300… 600 MCM
Torque: 8 Nm, 71 lb-in
Stripping length: 50 +/- 5 mm
Rated current: 500 A

Bolt connection with solid copper:
1x 10x 20… 40 mm x 1,0 mm
2x 10x 20… 40 mm x 1,0 mm
Torque: 20 Nm, 177 lb-in
Stripping length: 50 +/- 5 mm with whole (cf. mounting instruction)
Rated current: 800 A

Links

Documentation

Trouver votre contact

to the contact site

Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental

Order hotline (Germany)
+49 9563 751 161
order@woehner.de

Technical hotline (Germany)
+49 9563 751 260
support@woehner.com