

L'Entreprise
Innovations
Produits
The picture may show a similar product.
Référence 33217000
sectionneur à fusible NH taille 000, 125 A, à encastrer
borne à cage
for mounting plate
Système
Panel
Avantages produit
Self-closing inspection holes are available in the cover.
Groupe de produits | 09 |
Sous-groupe | 01 |
Dimensions de l'emballage | 1 |
EAN | 4021267332174 |
ECLASS 6.1 | 27142108 |
ECLASS 7.1 | 27142108 |
ETIM 4.0 | EC001040 |
ETIM 5.0 | EC001040 |
Normes
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
UL 4248-1
Approbations
IEC (CB) , UL , CCC , DNV GL
for UL feeder circuits >250V
Type: LTS-000
for fuse links size: | NH 000 |
fuse links acc. to standard: | IEC / HD 60269-2 |
permitted power dissipation of the fuse-link: | 9 W |
requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
Details IEC | |
Normes | |
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
Electrical data IEC | |
Courant assigné (IEC): | 125 A |
Tension assignée (IEC) CA: | 690 V |
Tension assignée (IEC) CC: | 440 V |
rated isolation voltage Ui AC: | 800 V |
rated isolation voltage Ui DC: | 500 V |
Tension assignée de tenue aux chocs Uimp: | 6 kV |
Catégorie d'emploi CA: | AC-23B (400 V) AC-22B (500 V) AC-21B (690 V) |
Catégorie d'emploi CC: | DC specifications: 2 current paths (L1,L3) in series DC-22B (440V/63A) DC-22B (220V/100A) DC-21B (440V/80A) DC-21B (220V/125A) |
cond. short-circuit current with fuses (AC): | 50 kA / 690 V |
approved wth fuse links of operation class: | gG |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 3,2 W.
(The power dissipation at full load would be 5,0 W.)
Supplementary data IEC | |
Les valeurs suivantes ont été vérifiées par des tests sous certaines conditions. Veuillez demander ces conditions à Wöhner avant de concevoir votre armoire. |
Tension maximale IEC CC: | 800 V |
Les unités de commutation à fusibles conformes à la norme IEC 60947-3 ne peuvent fonctionner au-delà de la tension de service nominale que si elles sont utilisées comme sectionneurs à fusible sans fonction de commutation de charge et cela jusqu'à la tension d'isolement assignée et sont marquées en conséquence. |
In accordance with the specified AC and DC switching properties and in consideration of the overload conditions, certain distances to earthed metal parts are to be adhered to. detailed information upon inquiry When several devices are used side-by-side in continuous operation, the rated load factor specified in IEC / EN 61439-1, Table 1, must be observed. |
Details UL | |
Normes | |
UL 4248-1 |
for UL feeder circuits >250V |
Electrical data UL | |
rated current (UL): | 125 A |
rated voltage (UL) AC: | 600 V |
rated frequency (UL): | 50 / 60 Hz |
Icc: | 100 kA |
Charactéristiques mécaniques | |
L x H x P: | 89 x 143 x 75 |
Poids: | 57,2 kg/100 |
Pôles: | 3 pôles |
Mounting: | for mounting plate |
front degree of protection: | IP30 |
Points de raccordement | |
cage clamp connection | |
screw drive: | S4 |
min. cross-section: | 1,5 mm² |
max. cross-section: | 50 mm² |
re: | 1.5 - 10 mm² |
rm: | 16 - 50 mm² |
f: | 2.5 - 50 mm² |
f + AE: | 1.5 - 50 mm² |
(f + AE may not fit with max. cross-section) | |
Alvéole de serrage: | 10 x 10 |
Not suitable for aluminium cables ! |
Not suitable for aluminium cables ! | |
Les unités de commutation à fusibles conformes à la norme IEC 60947-3 ne peuvent fonctionner au-delà de la tension de service nominale que si elles sont utilisées comme sectionneurs à fusible sans fonction de commutation de charge et cela jusqu'à la tension d'isolement assignée et sont marquées en conséquence. | |
permitted power dissipation of the fuse-link: | 9 W |
requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
for UL feeder circuits >250V |
Trouver votre contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com