Company
Innovations
Service
Products
The picture may show a similar product.
Part No.: 33623 000A
QUADRON 185Power Speed
NH in-line switch-disconnector-fuse size 00
flat version, connection top M8
screw connection, with fuse monitoring
operator independent switching (snap-action mechanism)
for busbars 30, 40, 60, 80, 100, 120 x 10
not suitable for systems with CrossLink protection modules
System
185Power
Advantages of the product
When the cover is open, all touchable parts are voltage-free
Operator-independent switching
Lockable cover with double-bit lock
Mixed installation with all components 185Power
Can be sealed when switched on or off
Can be locked with up to 3 padlocks when switched off
| Product group | 18 |
| Subgroup | 52 |
| pack size | 1 |
| EAN | 4021267336233 |
| ETIM 5.0 | EC001046 |
| ETIM 8.0 | EC001046 |
Standards
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Approvals
IEC (CB)
type number: QS185-00
EAC Type: NH
| for fuse links size: | NH 000, NH 00 |
| fuse links acc. to standard: | IEC / HD 60269-2 |
| permitted power dissipation of the fuse-link: | 12 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
| Details IEC | |
| Standards | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| rated current (IEC): | 160 A |
| rated voltage (IEC) AC: | 400 V |
| rated isolation voltage Ui AC: | 400 V |
| rated surge voltage Uimp : | 4 kV |
| Utilisation category AC (IEC 60947-3) : | AC-23B 160A/400V |
| cond. short-circuit current with fuses (AC): | 100 kA / 400 V |
| 120 kA / 400 V | |
| approved wth fuse links of operation class: | gG |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 35,2 W.
(The power dissipation at full load would be 55,0 W.)
| Supplementary data IEC | |
|
The following values have been verified with tests under certain conditions. Please ask Wöhner for this conditions before designing your panel. |
| A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such. |
| min. permitted operation temperature | -25°C |
| max. permitted operation temperature | 55°C |
| min. permitted temperature for transport and storage | -25°C |
| The use of knife links is not permitted. The rated values specified in this product description apply exclusively to the use of fuses. | |
| distance to grounded parts = 0mm at 120kA | |
| Special operating conditions corresponding to IEC / EN 61439-1 may yield to foulty activations of pilot switches and fuse monitors. The operating conditions have to be considered for the analysis of status signals. | |
| Degree of protection IP30 at front, degree of protection near terminal depends on installation |
| Mechanical data | |
| W x H x D: | 50 x 883 x 222 |
| weight: | 448,0 kg/100 |
| for busbars: | 30, 40, 60, 80, 100, 120 x 10 |
| front degree of protection: | IP30 |
| A fuse-combination unit acc. to IEC 60947-3 can only be operated at a higher voltage than its rated voltage, if it is used as a fuse-disconnector without breaking capacity, up to its max. rated insulation voltage and labelled as such. | |
|
Verwendete Variante der Sicherungsüberwachung: IL9075.12/010 |
|
| permitted power dissipation of the fuse-link: | 12 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
33728
000A
double adapter
for 2 devices size NH 00
for busbars: 30, 40, 60, 80, 100, 120 x 10
More
33734
000A
wedge clamp terminal
for Cu 10 - 95 mm²
size 00
for: Cu 10 - 95 mm²
More
33732
000A
terminal compartment cover, high version, connection bottom
for 33700, 33715, 33720, 33770, 33771, 33772 and QUADRON 185Power Speed size 00
size 00
More
33113
000
lateral cover support
for front covers
size 00 - 3
More
33758
000A
lateral bearing strip
for front covers
size 00 - 3
More
33644
000A
height compensation size 00
for alignment to the height of the in-line disconnector size 00
Ersatzteil
More
33645
000A
bearing area extension, top
for front covers
size 00
More
33653
000A
rear touch-safe protection
for terminal compartment
size 00
More
33642
000A
pilot switch
changeover 250 V AC / 5 A, 30 V DC / 4 A
QUADRON 185Power Speed size 00, 1, 2, 3
More
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Country
