Company
Innovations
Service
Products
for UL feeder circuits >250V
The picture may show a similar product.
Part No.: 36256000A
MOTUS®C14 30Compact Connect Plus
electronic motor starter, 3-pole or 1-pole switchable
direct and reversing starter 0.1 - 2.6 A
with IO-Link interface, with display
with CrossLink®Technology
NEW
System
30Compact 3P
| Product group | 21 |
| Subgroup | 36 |
| pack size | 1 |
| EAN | 4021267362560 |
| ECLASS 6.1 | 27370804 |
| ECLASS 7.1 | 27370804 |
| ETIM 4.0 | EC001037 |
| ETIM 5.0 | EC001037 |
Standards
IEC 60947-1:2007 + A1:2010
IEC 60947-4-2:2011
UL 60947-1
Approvals
UL , CCC
for UL feeder circuits >250V
type number: MOTUS C14-2,6-C+
UL file: E510845, UL category (for USA): NMFT https://www.ul.com
UL file: E510845, UL category (for Canada): NMFT7 https://www.ul.com
| Details IEC | |
| Standards | |
|
IEC 60947-1:2007 + A1:2010 IEC 60947-4-2:2011 |
| Electrical data IEC | |
| rated current (IEC): | 2.6 A |
| rated voltage (IEC) AC: | 500 V |
| min. operating voltage AC: | 130 V |
| prosp. Kurzschlussstrom: | 100 kA |
| trigger characteristic: |
Class 10A
Class 3E Class 2E Class 30 Class 40E Class 20 Class 10 Class 5 |
| set nominal current: | Yes |
| min. load current: | 0.1 A |
| max. switching frequency: | 2 Hz |
| switching cycles: | 30.000.000 |
| reply contact: | 1 NO + 1 CO |
| rated frequency (IEC): | 50 / 60 Hz |
| interface: | IO-Link | |
| rated isolation voltage Ui AC: | 500 V |
| rated surge voltage Uimp : | 4 kV |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 12.8 W.
(The power dissipation at full load would be 20.0 W.)
| Details UL | |
| Standards | |
| UL 60947-1 |
| for UL feeder circuits >250V |
| Electrical data UL | |
| rated current (UL): | 2.6 A |
| rated voltage (UL) AC: | 480 V |
| min. operating voltage AC: | 130 V |
| rated frequency (UL): | 50 / 60 Hz |
| SCCR: | 100 kA |
| Mechanical data | |
| W x H x D: | 22.5 x 160 x 174 |
| weight: | 60.7 kg/100 |
| poles: | 3-pole |
| vertical installation position: | Yes |
| horizontal installation position: | No |
| Terminal points | |
| screw clamp connection | |
| screw drive: | 0,8x4 |
| wire stripping: | 8 mm |
| min. cross-section: | 0.2 mm² |
| max. cross-section: | 2.5 mm² |
| Md min.: | 0.5 Nm |
| Md max.: | 0.6 Nm |
| min. cross-section UL: | AWG 24 |
| max. cross-section UL: | AWG 12 |
| torque (UL): | 5 - 7 lb-in |
| permitted degree of polution: | 2 |
| for UL feeder circuits >250V | |
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Country
