Company
Innovationen
Service
Products
for UL feeder circuits >250V
The picture may show a similar product.
Part No.: 33041000A
CAPUS®Panel
switch-disconnector 3-pole + N
box terminal 50 - 70 mm² / AWG 1 - 3/0, yellow-red handle
160 A
N on left side
for mounting plate or mounting rail
phase-out product
System
Panel
Advantages of the product
lockable in 0-position with a padlock (max. 5 mm diameter)
| Product group | 14 |
| Subgroup | 02 |
| pack size | 1 |
| EAN | 4021267330415 |
| catalog page | 2020 : 6.19 |
| ECLASS 6.1 | 27371403 |
| ECLASS 7.1 | 27371403 |
| ETIM 4.0 | EC000216 |
| ETIM 5.0 | EC000216 |
Standards
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
UL 60947-4-1
Approvals
UL
type number: SD3-4-160-R
UL file: E506215, UL category (for USA): NLRV https://www.ul.com
UL file: E506215, UL category (for Canada): NLRV7 https://www.ul.com
| Details IEC | |
| Standards | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| Rated current (IEC): | 160 A |
| rated voltage (IEC) AC: | 690 V |
| rated frequency (IEC): | 50 / 60 Hz |
| rated isolation voltage Ui AC: | 800 V |
| rated surge voltage Uimp : | 6 kV |
| Utilisation category AC (IEC 60947-3) : | AC-23 A (690 V / 125 A) AC-23 A (500 V / 160 A) AC-22 A (690 V / 125 A) AC-22 A (500 V / 160 A) AC-21 A (690 V / 160 A) |
| rated short-time withstand current Icw (1.0 s) max.: | 3 kA |
| rated making capacity: | 4.5 kA |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 7.7 W.
(The power dissipation at full load would be 12.0 W.)
| Details UL | |
| Standards | |
| UL 60947-4-1 |
| Electrical data UL | |
| rated current (UL): | 160 A |
| rated voltage (UL) AC: | 600 V |
| rated frequency (UL): | 50 / 60 Hz |
| for wires UL: | Cu 75°C |
| SCCR protected max.: | 10 kA |
| 10 kA with fuse max. 175 A / 600 V AC |
| Mechanical data | |
| W x H x D: | 88 x 113 x 81 |
| weight: | 53.5 kg/100 |
| poles: | 3-pole+N |
| Mounting: | for mounting plate or mounting rail |
| degree of protection: | IP20 |
| Terminal points | |
| cage clamp connection | |
| screw drive: | S4 |
| wire stripping: | 15 mm |
| min. cross-section: | 50 mm² |
| max. cross-section: | 70 mm² |
| rm: | 50 - 70 mm² |
| f: | 50 - 70 mm² |
| f + AE: | 50 - 70 mm² |
| (f + AE may not fit with max. cross-section) | |
| Md min.: | 6.0 Nm |
| Md max.: | 6.0 Nm |
| Not suitable for aluminium cables ! | |
| min. cross-section UL: | AWG 6 |
| max. cross-section UL: | AWG 3/0 |
| torque (UL): | 53,1 lb-in |
| for wires UL: | Cu 75°C |
Reference
N-pole :
Two connection space covers are necessary for each the top and the bottom of a 3P+N switch: 3-pole and 1-pole.
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Country
