公司介绍
Innovationen
产品
工具
适用 UL 供电电路 >250V
The picture may show a similar product.
订货号 33638000A
QUADRON®185Power Speed
条形 NH 隔离开关熔断器组，尺寸 2
带熔丝监测器
下端连接 M12
double-breaking
operator independent switsching
适用母线 30, 40, 60, 80, 100, 120 x 10
accessory required for busbar mounting
系统
185Power
产品优势
When the cover is open, all touchable parts are voltage-free
Operator-independent switching
Lockable cover with double-bit lock
Mixed installation with all components 185Power
Can be sealed when switched on or off
Can be locked with up to 3 padlocks when switched off
| 产品组 | 18 |
分组 |
54 |
| 包装件数 | 1 |
| EAN | 4021267336387 |
| 产品手册页码 | 2020 : 4.17, 4.18 |
| ECLASS 6.1 | 27142108 |
| ECLASS 7.1 | 27142108 |
| ETIM 4.0 | EC001046 |
| ETIM 5.0 | EC001046 |
标准
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
认证许可
IEC (CB) , EAC
型号: QS185-2
EAC Type: NH
| for fuse links size: | NH 2 |
| fuse links acc. to standard: | IEC / HD 60269-2 |
| 所使用熔断器的允许损耗功率: | 45 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
| Details IEC | |
| 标准 | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| 额定电流（IEC）: | 400 A |
| 额定电压（IEC）AC: | 400 V |
| rated isolation voltage Ui AC: | 400 V |
| 额定冲击耐受电压 Uimp: | 4 kV |
| 使用等级 AC (IEC 60947-3): | AC-23B 400A/400V |
| 带熔断器时的条件额定短路电流: | 100 kA / 400 V |
| 120 kA / 400 V | |
| 带熔断器测定的工作等级: | gG |
功率输出:
The power dissipation at a typical load of 80 % results to 76.8 W.
(The power dissipation at full load would be 120.0 W.)
| Supplementary data IEC | |
|
下述参数已经在特定条件下通过测试得到验证。开始设计之前，请联系维纳尔咨询这些条件。 |
| 符合 IEC 60947-3 的熔断器组合电器，只有在作为没有分断能力的熔断器式隔离器时、在不超过额定绝缘电压使用并进行相应的标识时，才允许超过额定工作电压运行。 |
| 适用熔断器 IEC 60269-2-1 (I) / DIN VDE 0636-201 尺寸1 最大23 W 损耗功率 | |
| distance to grounded parts = 0mm at 120kA | |
| Special operating conditions corresponding to IEC / EN 61439-1 may yield to foulty activations of pilot switches and fuse monitors. The operating conditions have to be considered for the analysis of status signals. | |
| Degree of protection IP30 at front, degree of protection near terminal depends on installation |
| 机械数值 | |
| 宽 x 高 x 厚: | 100 x 941 x 274 |
| 重量: | 1420.0 kg/100 |
| 适用母线: | 30, 40, 60, 80, 100, 120 x 10 |
| CT can be integrated in the device: | ja |
| CT can be integrated in the CT module: | ja |
| 正面防护等级: | IP30 |
Type of fastening:
can be screwed onto drilled busbar, undrilled drilling with terminal clamp
获取联系人
跳转至联系页面
电话：+86 10 67870300
邮箱：info@woehner.com.cn
网站：woehner.com.cn
Country
