公司介绍
Innovations
Service
产品
适用 UL 供电电路 >250V
The picture may show a similar product.
订货号 36131000A
MOTUS®CrossBoard
混合式电动机起动器，3 极
电子元件 1.5 - 9 A 直接和反向起动器，带 IO-Link
带 CrossLink® 接口
带 CrossLink® 接口
新型
系统
CrossBoard® 125A / 250A, CrossBoard® 800 A
| 产品组 | 21 |
分组 |
01 |
| 包装件数 | 1 |
| EAN | 4021267361310 |
| ECLASS 6.1 | 27370804 |
| ECLASS 7.1 | 27370804 |
| ETIM 4.0 | EC001037 |
| ETIM 5.0 | EC001037 |
标准
IEC 60947-1:2007 + A1:2010 + A2:2014
IEC 60947-4-2:2011
IEC 61508-1:2010
ISO 13849-1:2015
UL 60947-1
认证许可
UL
for UL feeder circuits >250V
型号: 36131
UL 文件: E360470, UL 类别 (适用美国) : NLDX https://www.ul.com
UL 文件: E360470, UL 类别 (适用加拿大) : NLDX7 https://www.ul.com
| Details IEC | |
| 标准 | |
|
IEC 60947-1:2007 + A1:2010 + A2:2014 IEC 60947-4-2:2011 IEC 61508-1:2010 ISO 13849-1:2015 |
| Electrical data IEC | |
| 额定电流（IEC）: | 9 A |
| 额定电压（IEC）AC: | 500 V |
| min. operating voltage AC: | 42 V |
| trigger characteristic: | Class 10A |
| set nominal current: | Yes |
| min. load current: | 1.5 A |
| max. switching frequency: | 2 Hz |
| switching cycles: | 30.000.000 |
| safety level: | SIL3 |
| rated frequency (IEC): | 50 / 60 Hz |
| rated isolation voltage Ui AC: | 550 V |
| 额定冲击耐受电压 Uimp: | 6 kV |
功率输出:
The power dissipation at a typical load of 80 % results to 7.7 W.
(The power dissipation at full load would be 12.0 W.)
| Details UL | |
| 标准 | |
| UL 60947-1 |
| for UL feeder circuits >250V |
| Electrical data UL | |
| 额定电流 (UL): | 7.6 A |
| 额定电压 (UL) AC: | 500 V |
| min. operating voltage AC: | 42 V |
| rated frequency (UL): | 50 / 60 Hz |
| SCCR unprotected max.: | 5 kA |
| 3 cycles (without OPD) @ 600 V AC | |
| SCCR protected max.: | 100 kA |
| 短路电流额定值: | 100 kA with JDDZ fuse Class J 175 A / 600 V AC |
| 机械数值 | |
| 宽 x 高 x 厚: | 22.5 x 160 x 120 |
| 重量: | 51.4 kg/100 |
| 极数: | 3线 |
| 防护等级: | IP20 |
| vertical installation position: | Yes |
| horizontal installation position: | No |
| 连接端 | |
| screw clamp connection | |
| screw drive: | 0,8x4 |
| wire stripping: | 8 mm |
| min. cross-section: | 0.2 mm² |
| 最大横截面积: | 2.5 mm² |
| Md min.: | 0.5 Nm |
| Md max.: | 0.6 Nm |
| 最小横截面积: | AWG 24 |
| max. cross-section UL: | AWG14 |
| torque (UL): | 5,0 - 7,0 lb-in |
| permitted degree of polution: | 2 |
| for UL feeder circuits >250V | |
获取联系人
跳转至联系页面
电话：+86 10 67870300
邮箱：info@woehner.com.cn
网站：woehner.com.cn
Country
