 
             
    
    
适用 UL 供电电路 >250V
The picture may show a similar product.
订货号 36256 000A
MOTUS®C14 30Compact Connect Plus
混合型电机启动器,3 极或 1 极分断
0.1 - 2.6 A 直接和反向起动器
with IO-Link interface, with display
采用 CrossLink®Technology 技术
系统
30Compact 3P
| 产品组 | 21 | 
| 分组 | 36 | 
| 包装件数 | 1 | 
| EAN | 4021267362560 | 
| ECLASS 6.1 | 27370804 | 
| ECLASS 7.1 | 27370804 | 
| ETIM 4.0 | EC001037 | 
| ETIM 5.0 | EC001037 | 
标准
IEC 60947-1:2007 + A1:2010
IEC 60947-4-2:2011
UL 60947-1
认证许可
UL , CCC
																		 
																		 
for UL feeder circuits >250V
型号: MOTUS C14-2,6-C+
UL 文件: E510845, UL 类别 (适用美国) : NMFT https://www.ul.com
UL 文件: E510845, UL 类别 (适用加拿大) : NMFT7 https://www.ul.com
| Details IEC | |
| 标准 | |
| IEC 60947-1:2007 + A1:2010 IEC 60947-4-2:2011 | 
| Electrical data IEC | |
| 端部供电(IEC): | 2.6 A | 
| 额定电压(IEC)AC: | 500 V | 
| min. operating voltage AC: | 130 V | 
| prosp. Kurzschlussstrom: | 100 kA | 
| inductive rated current: | 2.6 A | 
| trigger characteristic: | Class 10A Class 3E Class 2E Class 30 Class 40E Class 20 Class 10 Class 5 | 
| set nominal current: | Yes | 
| min. load current: | 0.1 A | 
| max. switching frequency: | 2 Hz | 
| switching cycles: | 30.000.000 | 
| reply contact: | 1 NO + 1 CO | 
| rated frequency (IEC): | 50 / 60 Hz | 
| interface: | IO-Link | |
| rated isolation voltage Ui AC: | 500 V | 
| 额定冲击耐受电压 Uimp: | 4 kV | 
功率输出:
The power dissipation at a typical load of 80 % results to 12.8 W.
(The power dissipation at full load would be 20.0 W.)
| Details UL | |
| 标准 | |
| UL 60947-1 | 
| for UL feeder circuits >250V | 
| Electrical data UL | |
| 额定电流 (UL): | 2.6 A | 
| 额定电压 (UL) AC: | 480 V | 
| min. operating voltage AC: | 130 V | 
| rated frequency (UL): | 50 / 60 Hz | 
| SCCR: | 100 kA | 
| 机械数值 | |
| 宽 x 高 x 厚: | 22.5 x 160 x 174 | 
| 重量: | 60.7 kg/100 | 
| 极数: | 3 极 | 
| vertical installation position: | Yes | 
| horizontal installation position: | No | 
| 连接端 | |
| screw clamp connection | |
| screw drive: | 0,8x4 | 
| wire stripping: | 8 mm | 
| min. cross-section: | 0.2 mm² | 
| 最大横截面积: | 2.5 mm² | 
| Md min.: | 0.5 Nm | 
| Md max.: | 0.6 Nm | 
| 最小横截面积: | AWG 24 | 
| max. cross-section UL: | AWG 12 | 
| torque (UL): | 5 - 7 lb-in | 
| permitted degree of polution: | 2 | 
| for UL feeder circuits >250V | |
获取联系人
跳转至联系页面
电话:+86 10 67870300
邮箱:info@woehner.com.cn
网站:woehner.com.cn