Company
Innovationen
Products
Tools
for UL feeder circuits >250V
На фотографии может быть изображена аналогичная статья.
Арт.: 33334000
CAPUS®Panel
выключатель-разъединитель нагрузки 3-полюсный
Винт M10, ручка серая
400 A
für Montageplatte
ERGON-315
Система
Mounting plate
Преимущества продукта
double-breaking main contacts, visible separation sections, voltage-free exchange of fuses, user-independent switching, assembly and connection material contained in scope of delivery.
| Группа продуктов | 14 |
| Подгруппа | 06 |
| Кол-во | 1 |
| EAN | 4021267333348 |
| страница каталога | 2020 : 6.22 |
| ECLASS 6.1 | 27371403 |
| ECLASS 7.1 | 27371403 |
| ETIM 4.0 | EC000216 |
| ETIM 5.0 | EC000216 |
Стандарты
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Сертификация
IEC (CB) , EAC
номер типа: LTS-400
Тип EAC: LTS
| Подробности IEC | |
| Стандарты | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Электрические данные IEC | |
| Номинальный ток (IEC): | 400 A |
| номинальное напряжение (IEC) AC: | 500 В |
| номинальное напряжение изоляции U i AC: | 1000 В |
| номинальное импульсное напряжение U imp : | 12 kV |
| Катагория применения AC: | AC-23B (500V) AC-22B (500V) AC-21B (500V) |
| одобрено с плавкими вставками рабочего класса: | gG |
| номинальный кратковременный выдерживаемый ток I cw (1,0 с) макс.: | 15 кА |
| номинальная включающая способность: | 30 кА |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 36,5 Вт.
(The power dissipation at full load would be 57,0 Вт.)
| Mechanical lifespan (switching operations) 7000, rated short-circuit making capacity 30kA | |
| conv. therm. current in housing 400A, horizontal installation (adjacent poles) encapsulated 504 x 378 x 302mm 400A, vertical installation (poles beneath each other) encapsulated 500 x 500 x 300mm |
|
| Shock protection at front with terminal space cover IP40 |
| Механические данные | |
| Ш x В x Г: | 270 x 237 x 197 |
| Вес: | 538,0 kg/100 |
| Полюсность: | 3-пол. |
| Mounting: | für Montageplatte |
Type of fastening: screw-on
connection screw (clamps and wedge clamp terminal can be retrofitted),
screw connection
M10, 28Nm ± 10% torque,
clamp connection for lam. Cu
terminal space 18x1-10mm,
6-8Nm torque
wedge clamp connection, single
cross-section 70 - 150mm², s(r), f, f+AE** Cu - Al*, 6-8Nm torque
wedge clamp connection, double
cross-section 2 x 70 - 120mm², s(r), f, f+AE** Cu, 6-8Nm torque
* Aluminium conductors must be prepared before connection in accordance with the pertinent technical recommendations. The connections are to be checked at regular intervals and serviced not later than every 6 months.
** reduction in the max. conductor cross-sections may be required.
| Особенности клеммной техники | |
| Not suitable for aluminium cables ! | |
|
screw M10 : |
|
Справочная информация
When installing a cover, the switch-disconnector on the housing must not be closed, the safety instructions for the Emergency Stop switch must be observed.
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Страна
