Azienda
Innovazioni
Servizi
Prodotti
for UL feeder circuits >250V
The picture may show a similar product.
Cod.art.: 36050 000A
CAPUS®CrossBoard
Interruttore con fusibili, 3p
per fusibili 10x38
16 A / 3P
double-breaking
operator independent switching (snap-action mechanism)
connessione cavi in basso
con CrossLink® interface
Montaggio
CrossBoard® 125A / 250A, CrossBoard® 800 A
Vantaggi prodotto
3-pole switch-disconnector for safe galvanic isolation
Accommodates 10 x 38 fuse links in accordance with IEC 60269-2 from 0.5 A to 16 A
Lockable in the open or closed position using a locking device (accessory)
| gruppo di prodotto | 01 |
| sottogruppo prodotto | 42 |
| pz/ conf. | 1 |
| EAN | 4021267360504 |
| ECLASS 6.1 | 27371401 |
| ECLASS 7.1 | 27371401 |
| ETIM 4.0 | EC001040 |
| ETIM 5.0 | EC001040 |
Norme
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
| per fusibili di grandezza: | 10x38 |
| fusibile secondo norma: | IEC / HD 60269-2 |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
| Details IEC | |
| Norme | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| corrente nominale (IEC): | 16 A |
| tensione nominale (IEC) AC: | 400 V |
| frequenza nominale (IEC): | 50 / 60 Hz |
| tensione di picco Uimp: | 4 kV |
| Categoria d'impiego AC: | AC-22B (400V) |
| corrente nom. di cto cto condizionata da fusibili (AC): | 50 kA |
| secondo prove fatte con fusibili di caratteristica: | gG |
| Electrical data UL | |
| for wires UL: | Cu 60°C |
| Valori meccanici | |
| L x A x P: | 22.5 x 180 x 88 |
| peso: | 17,5 kg/100 |
| Poli: | 3 poli |
| grado di protezione: | IP30 |
| Connessioni | |
| cage clamp connection | |
| screw drive: | 1x6,0 |
| wire stripping: | 10 mm |
| min. cross-section: | 1,5 mm² |
| max. cross-section: | 6 mm² |
| re: | 1 - 6 mm² |
| f: | 0.75 - 1.5 mm² |
| f + AE: | 0.75 - 1.5 mm² |
| (f + AE may not fit with max. cross-section) | |
| Md min.: | 1,2 Nm |
| Md max.: | 1,5 Nm |
| Not suitable for aluminium cables ! | |
| min. cross-section UL: | AWG 16 |
| max. cross-section UL: | AWG 10 |
| torque (UL): | 8,8 - 10,6 lb-in |
| for wires UL: | Cu 60°C |
| Not suitable for aluminium cables ! | |
|
4. Switch contact can be used as a signal switch: 24 V / 25 mA - 250 V / 16 A |
|
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
36919
000A
lucchetto per bloccare l'interruttore
per: 36050
Di Più
Trova il tuo contatto
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Country