Azienda
Innovationen
Prodotti
Tools
for UL feeder circuits >250V
The picture may show a similar product.
Cod.art.: 33501000
QUADRON®60Classic Speed
Sezionatore sottocarico per fusibili NH, 3p
morsetti a gabbia, connessione in alto
Gr. NH 00
double-breaking
operator independent switsching
per barre 12, 15, 20, 25, 30 x 5, 10 e barre profilate
Montaggio
60Classic
Vantaggi prodotto
With spring-controlled switch mechanism for frequent switching as per utilisation category "A"
Can be locked in neutral position with up to 3 Upadlocks
FLAG indicator shows the switch setting
Fuses can be changed safely and without tools thanks to double-breaking main contacts
Additional visible separating section by removing the cover incl. fuses
Can be used as mains disconnector as per IEC / EN 60204-1 (main switch).
Mains switch only in combination with AC-23A/B
CrossLink® adapter technology
Simple and safe clicking into place and making contact
Busbar supports can be mounted above each other for flat rails
Compact dimensions (106mm wide)
| gruppo di prodotto | 15 |
| sottogruppo prodotto | 20 |
| pz/ conf. | 1 |
| EAN | 4021267335014 |
| pagina catalogo | 2020 : 3.26 |
| ECLASS 6.1 | 27371401 |
| ECLASS 7.1 | 27371401 |
| ETIM 4.0 | EC001040 |
| ETIM 5.0 | EC001040 |
Norme
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Omologazioni
IEC (CB) , VDE , CCC , DNV GL , EAC
type no.: QCS-NH00
EAC Type: NH
CCC certificate: 2010010302392782
| per fusibili di grandezza: | NH 000, NH 00 |
| fusibile secondo norma: | IEC / HD 60269-2 |
| potenza diss. max. ammissibile del fusibile inserito: | 10 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
| Details IEC | |
| Norme | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| corrente nominale (IEC): | 125 A |
| tensione nominale (IEC) AC: | 690 V |
| tensione nominale di isolamento Ui AC: | 800 V |
| tensione di picco Uimp: | 8 kV |
| Categoria d'impiego AC: | AC-23B (690V/125A) AC-23A (500V/125A) AC-22A (690V/125A) |
| Categoria d'impiego DC: | DC specifications: 2 current paths (L1,L3) in series DC-22B (220V/125A) |
| corrente nom. di cto cto condizionata da fusibili (AC): | 50 kA / 690 V (125A) |
| secondo prove fatte con fusibili di caratteristica: | gG |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 17,2 W.
(The power dissipation at full load would be 26,8 W.)
| Special operating conditions corresponding to IEC / EN 61439-1 may yield to foulty activations of pilot switches and fuse monitors. The operating conditions have to be considered for the analysis of status signals. | |
| When several devices are used side-by-side in continuous operation, the rated load factor specified in VDE 0660 Part 500 / EN 60 439-1, Table 1, must be observed. | |
| System component: degree of protection IP20 at front as per DIN EN 60529, degree of protection near terminal depends on installation; shock protection as per DIN EN 50274 adapter module: front side degree of protection IP20 as per DIN EN 60529 (finger-safe) |
| Valori meccanici | |
| L x A x P: | 106 x 200 x 128 |
| peso: | 219,0 kg/100 |
| Poli: | 3 poli |
| per barre: | 12, 15, 20, 25, 30 x 5, 10 e barre profilate |
Busbar connector: externally tensioned contacting, convenient click mechanism, simple conversion of the combination bases from 5 to 10mm-thick busbars
| Connessioni | |
| Not suitable for aluminium cables ! | |
|
Box terminal: |
|
Trova il tuo contatto
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Country
