L'Entreprise
Innovationen
Produits
Outils
for UL feeder circuits >250V
The picture may show a similar product.
Référence 33630000A
QUADRON®185Power Speed
réglette sectionneur de fusible NH taille 1
départs en bas M12
double-breaking
operator independent switsching
pour jeux de barres 30, 40, 60, 80, 100, 120 x 10
accessory required for busbar mounting
Système
185Power
Avantages produit
When the cover is open, all touchable parts are voltage-free
Operator-independent switching
Lockable cover with double-bit lock
Mixed installation with all components 185Power
Can be sealed when switched on or off
Can be locked with up to 3 padlocks when switched off
| Groupe de produits | 18 |
| Sous-groupe | 53 |
| Dimensions de l'emballage | 1 |
| EAN | 4021267336301 |
| catalog page | 2020 : 4.17, 4.18 |
| ECLASS 6.1 | 27142108 |
| ECLASS 7.1 | 27142108 |
| ETIM 4.0 | EC001046 |
| ETIM 5.0 | EC001046 |
Normes
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Approbations
IEC (CB) , EAC
Type: QS185-1
EAC Type: NH
| for fuse links size: | NH 1 |
| fuse links acc. to standard: | IEC / HD 60269-2 |
| permitted power dissipation of the fuse-link: | 32 W |
| requirements for contact parts: |
Fuse links with silver-plated contact pieces recommended. For fuse links with nickel-plated contact pieces, a reduction factor of 0.8 is to be observed. |
| Details IEC | |
| Normes | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| Courant assigné (IEC): | 250 A |
| Tension assignée (IEC) CA: | 800 V |
| Tension assignée (IEC) CC: | 800 V |
| rated isolation voltage Ui AC: | 1000 V |
| rated isolation voltage Ui DC: | 1000 V |
| Tension assignée de tenue aux chocs Uimp: | 12 kV |
| Catégorie d'emploi CA: | AC-22B (800 V / 160 A) |
| Catégorie d'emploi CC: | DC-20B max. voltage between the fuses: 1000 V visible information required: Do not switch under load. |
| cond. short-circuit current with fuses (AC): | 50 kA / 800 V (160 A) |
| 100 kA / 690 V (250 A) | |
| 120 kA / 500 V (250 A) | |
| approved wth fuse links of operation class: | gG |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 51,2 W.
(The power dissipation at full load would be 80,0 W.)
| Supplementary data IEC | |
|
Les valeurs suivantes ont été vérifiées par des tests sous certaines conditions. Veuillez demander ces conditions à Wöhner avant de concevoir votre armoire. |
| Les unités de commutation à fusibles conformes à la norme IEC 60947-3 ne peuvent fonctionner au-delà de la tension de service nominale que si elles sont utilisées comme sectionneurs à fusible sans fonction de commutation de charge et cela jusqu'à la tension d'isolement assignée et sont marquées en conséquence. |
| The use of knife links is not permitted. The rated values specified in this product description apply exclusively to the use of fuses. | |
| distance to grounded parts = 0mm at 120kA | |
| Special operating conditions corresponding to IEC / EN 61439-1 may yield to foulty activations of pilot switches and fuse monitors. The operating conditions have to be considered for the analysis of status signals. | |
| Degree of protection IP30 at front, degree of protection near terminal depends on installation |
| Charactéristiques mécaniques | |
| L x H x P: | 100 x 781 x 274 |
| Poids: | 1176,0 kg/100 |
| pour jeux de barres: | 30, 40, 60, 80, 100, 120 x 10 |
| CT can be integrated in the device: | ja |
| CT can be integrated in the CT module: | ja |
| front degree of protection: | IP30 |
Type of fastening:
can be screwed onto drilled busbar, undrilled drilling with terminal clamp
Conseils
Montageset erforderlich, siehe Zubehör
Trouver votre contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Pays
