Company
Innovationen
Products
Tools
for UL feeder circuits >250V
The picture may show a similar product.
Part No.: 33333000
CAPUS®Panel
switch-disconnector 3-pole
screw M10, graphite-grey handle
250 A
für Montageplatte
ERGON-200
System
Mounting plate
Advantages of the product
double-breaking main contacts,
visible separation sections,
user-independent switching,
assembly and connection material contained in scope of delivery
| Product group | 14 |
| Subgroup | 03 |
| pack size | 1 |
| EAN | 4021267333331 |
| catalog page | 2020 : 6.22 |
| ECLASS 6.1 | 27371403 |
| ECLASS 7.1 | 27371403 |
| ETIM 4.0 | EC000216 |
| ETIM 5.0 | EC000216 |
Standards
IEC 60947-1:2020
IEC 60947-3:2020 AC ratings only
Approvals
IEC (CB) , EAC
type number: LTS-250
EAC Type: LTS
| Details IEC | |
| Standards | |
|
IEC 60947-1:2020 IEC 60947-3:2020 AC ratings only |
| Electrical data IEC | |
| Rated current (IEC): | 250 A |
| rated voltage (IEC) AC: | 500 V |
| rated isolation voltage Ui AC: | 1000 V |
| rated surge voltage Uimp : | 12 kV |
| Utilisation category AC (IEC 60947-3) : | AC-23A (500A/200A) AC-23 B (415V) AC-22 B (500V) AC-21 B (500V) |
| approved wth fuse links of operation class: | gG |
| rated short-time withstand current Icw (0.5 s) max.: | 10 kA |
| rated making capacity: | 20 kA |
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 21.4 W.
(The power dissipation at full load would be 33.5 W.)
| conv. therm. current in housing 250 A, horizontal installation (adjacent poles) encapsulated 252 x 378 x 302mm 250 A, vertical installation (poles beneath each other) encapsulated 300 x 400 x 200 mm |
|
| max. rated operating voltage 500V AC max. rated operating current 250A current type AC (50-60Hz) rated insulation voltage 1000V rated surge voltage strength 12kV short-time current strength 7kA -1s rated conditional short-circuit current 80/50kA (fuses gL/gG; size 1 -200/250A-500V) mechanical lifespan (switching operations) 7000 rated short-circuit making capacity 20kA |
| Mechanical data | |
| W x H x D: | 171 x 158 x 157 |
| weight: | 194.0 kg/100 |
| poles: | 3-pole |
| Mounting: | für Montageplatte |
Type of fastening: screw-on
connection screw (clamps and wedge clamp terminal can be retrofitted),
screw connection
M10, 28Nm ± 10% torque,
clamp connection for lam. Cu
terminal space 14x1-9mm,
4Nm torque
wedge clamp connection
cross-section 70 - 120mm², s(r), f, f+AE** Cu - Al*, 4Nm torque
* Aluminium conductors must be prepared before connection in accordance with the pertinent technical recommendations. The connections are to be checked at regular intervals and serviced not later than every 6 months.
** reduction in the max. conductor cross-sections may be required.
| Terminal points | |
| Not suitable for aluminium cables ! | |
|
screw M10 : |
|
Reference
When installing a cover, the switch-disconnector on the housing must not be closed, the safety instructions for the Emergency Stop switch must be observed.
Find your contact
to the contact site
Wöhner GmbH & Co. KG
Elektrotechnische Systeme
Mönchrödener Str. 10
96472 Rödental
Order hotline (Germany)
+49 9563 751 161
order@woehner.de
Technical hotline (Germany)
+49 9563 751 260
support@woehner.com
Country
