Select product

for UL feeder circuits >250V

holder for cylindrical fuses (31974)

The picture may show a similar product.

Description

Part No.: 31974000

AMBUS^®Panel

holder for cylindrical fuses

10x38 / 2P

30 A / 1000 V DC

für DIN Tragschiene

System

DIN rail

Advantages of the product

large clamping range
holder for label

Product group	17
Subgroup	06

pack size	6
EAN	4021267319748

catalog page

2020 : 6.7

ECLASS 6.1	27142190
ECLASS 7.1	27142190
ETIM 4.0	EC002705
ETIM 5.0	EC002705

Approvals

Standards

IEC 60269-1:2006 + A1:2009 + A2:2014
IEC 60269-2:2013 + A1:2016

UL 4248-1

UL 4248-19

Approvals

IEC (CB) , CSA , UL , CCC , EAC

for UL feeder circuits >250V

type number: AES10x38/PV

EAC Type: AES

UL file: E342576, UL category (for USA): IZMR https://www.ul.com

CSA file: 110285, CSA class: 6225-30 https://directories.csa-international.org

CCC certificate: 2013010308601276

Technical data

for fuse links size:	10x38
fuse links acc. to standard:	IEC / EN 60269-6
permitted power dissipation of the fuse-link:	4 W

Details IEC
Standards
IEC 60269-1:2006 + A1:2009 + A2:2014 IEC 60269-2:2013 + A1:2016

Electrical data IEC
Rated current (IEC):	30 A

rated voltage (IEC) DC:

1000 V

rated isolation voltage U_i DC:	1000 V
rated surge voltage U_imp :	6 kV

cond. short-circuit current with fuses (DC):	20 kA / 1000 V (30 A)
approved wth fuse links of operation class:	gPV

power dissipation of the article:

The power dissipation at a typical load of 80 % results to 0.4 W.

(The power dissipation at full load would be 0.6 W.)

Supplementary data IEC
The following values have been verified with tests under certain conditions. Please ask Wöhner for this conditions before designing your panel.

max. permitted voltage (IEC) DC:

1000 V

use of fuse links with silver plated caps is recommended

Details UL
Standards
UL 4248-1 UL 4248-19

for UL feeder circuits >250V
suitable for field-installed conductors

Electrical data UL
rated current (UL):	30 A
rated voltage (UL) DC:	1000 V
for wires UL:	Cu 90°C

SCCR protected max.:	33 kA
	with IZLT fuse 10x38 30 A / 1000 V DC
max. let-through current Id (UL):	8.65 kA
max. let-trough energy (UL):	16.9 kA²s

Mechanical data
W x H x D:	36 x 81 x 58
weight:	10.3 kg/100
poles:	2-pole
Mounting:	für DIN Tragschiene

degree of protection:	IP20
front degree of protection:	IP20

Terminal points
cage clamp connection
screw drive:	PZ2
wire stripping:	11 mm
min. cross-section:	0.75 mm²
max. cross-section:	25 mm²
Md min.:	2.0 Nm
Md max.:	2.5 Nm
Not suitable for aluminium cables !

min. cross-section UL:	AWG 18
max. cross-section UL:	AWG 4
torque (UL):	18 - 22 lb-in
for wires UL:	Cu 90°C

for applications acc. to IEC / EN : 1 wire: Cu 0,75 - 25 mm² 2 wires (of same cross-section): Cu 0,75 - 10 mm² flexible cables, directly or with wire-end ferrule (flexible cables of max. cross-section may not fit when using wire-end ferrule) Md 2,0 - 2,5 Nm / 18 - 22 lb.in. for applications acc. to UL / CSA : only Cu cables acc. to UL 486E 1 wire: AWG 18 - AWG 8, Class B, Md 2,0 -2,5 Nm / 18 - 22 lb.in. AWG 6 - AWG 4, Class C, Md 2,5 - 3,0 Nm / 22 - 26 lb.in. 2 wires (of identical cross-section): AWG 18 - AWG 8, Class B, Md 2,0 - 2,5 Nm / 18 - 22 lb.in. AWG 6, Class C, Md 2,0 - 2,5 Nm / 18 - 22 lb.in.