Connection terminal plate, 3 pole (01240)

The picture may show a similar product.

Part No.: 01240000

CRITO^®60Classic

Connection terminal plate, 3 pole

6 - 50 mm², AWG 10 - 2/0, lam. Cu. 7 - 9 x 4 - 10

for busbars 12, 15, 20, 25, 30 x 5, 10 and section busbars

System

60Classic

Advantages of the product

Terminals can be removed for connection of uncut conductors

Product group	07
Subgroup	42

pack size	1
EAN	4021267012403

catalog page

2020 : 3.5

Standards

IEC 61439-1:2011
IEC 60999-1:1999
IEC 60999-2:2003

UL 508

Approvals

CSA , UL , DNV GL , EAC

for UL feeder circuits >250V

type number: 240-L

EAC Type: TE-3P

UL file: E123577, UL category (for USA): NMTR https://www.ul.com

UL file: E123577, UL category (for Canada): NMTR7 https://www.ul.com

CCC approval: no certification required

rated surge voltage U_imp :	6 kV

The insulation performance of the article depends on the installation conditions.

rated peak withstand current I_pk max.:

40.5 kA

power dissipation of the article:

The power dissipation at a typical load of 80 % results to 1.9 W.

(The power dissipation at full load would be 3.0 W.)

Supplementary data IEC
The following values have been verified with tests under certain conditions. Please ask Wöhner for this conditions before designing your panel.

for UL feeder circuits >250V
suitable for field-installed conductors

SCCR:

65 kA with any DIVQ/7 circuit breaker 200 A / 480 V AC
100 kA with JDDZ fuse Class J, CF or T 150 A / 600 V AC

Terminal points
cage clamp connection
wire stripping:	25 mm
min. cross-section:	6 mm²
max. cross-section:	50 mm²
Md min.:	8.0 Nm
Md max.:	10.0 Nm
Not suitable for aluminium cables !

min. cross-section UL:	AWG 10
max. cross-section UL:	AWG 2/0
torque (UL):	71 lb-in

6 - 50 (70) mm² / AWG 10 - AWG 2/0 flexible cables, directly or with wire-end ferrule, stranded round cables lam. Cu 7x4 - 9x6 Md 8-10 Nm / 71 lb-in (flexible cables of maximum cross-section may not fit when using wire-end ferrule)